Hi
Can anyone explain to me the difference between feed rate and flow rate I am trying to increase the flow rate to lay a larger amount and give better adhesion between runs as they seem to narrow and not touching each other
Errol
feed and flow rates
Re: feed and flow rates
Hello,ErrolErrol wrote:Hi
Can anyone explain to me the difference between feed rate and flow rate I am trying to increase the flow rate to lay a larger amount and give better adhesion between runs as they seem to narrow and not touching each other
Errol
“Flowrate” is the rate of plastic exiting the extruder’s nozzle. With a little math and science the flowrate is a function of the extruder motor speed and the volume of filament. “Feedrate” is the rate of speed of the X and Y platform.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!