Hi,
No problems building the printer except for the documentation didn't match what I had.
This is what the printer is printing currently.
Temp extruder is 195, Bed 65, using 1.75 pla
any tips would be greatly appreciated.
bad print
Re: bad print
What's the slicer setting you use? How about using the recommended setting in user manual?
For more print quality issues, you can check this post:http://www.geeetech.com/forum/viewtopic ... 26&t=17183
For more print quality issues, you can check this post:http://www.geeetech.com/forum/viewtopic ... 26&t=17183