First layer problem

Post Reply
gepd
Posts: 5
Joined: Tue Feb 16, 2016 7:58 am

First layer problem

Post by gepd » Sun May 22, 2016 7:29 am

I'm having a problem with the first layer of all my printings.
I mostly print rectangular shapes. When the print finish the first layer always has a filament that I have to cut off, to a better understanding I'll attach some images.

I'm using PLA, the extruder is at 210° in the first and other layers
and the bed 80° with the first and other layers

Can someone tell me how can I solve that?
Attachments
IMG_20160521_152433.jpg
IMG_20160521_152433.jpg (511.95 KiB) Viewed 7897 times
IMG_20160521_152355.jpg
IMG_20160521_152355.jpg (519.05 KiB) Viewed 7897 times
IMG_20160521_152210.jpg
IMG_20160521_152210.jpg (465.4 KiB) Viewed 7897 times

Torm
Posts: 11
Joined: Mon Jan 04, 2016 2:27 pm

Re: First layer problem

Post by Torm » Mon Jun 06, 2016 7:53 pm

Hello, colleague, I see there two possible problems - low extruder temperature for your filament and low filament flow too. As a first step you need increase filament flow, for example 5-10% plus.

gepd
Posts: 5
Joined: Tue Feb 16, 2016 7:58 am

Re: First layer problem

Post by gepd » Tue Jun 07, 2016 2:00 pm

Thanks Torm,
I'll try increasing the filament flow. I've already tried with higher extruder/bed temperature, but same issue

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: First layer problem

Post by William » Tue Jun 07, 2016 5:26 pm

You can try with lower extruder/bed temperature,like the former 200' and the latter 65'.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply