Half sized prints

Post Reply
Sollyman
Posts: 1
Joined: Tue Dec 15, 2015 5:14 am

Half sized prints

Post by Sollyman » Wed Jan 27, 2016 6:11 am

When axis is told to move 100mm it moves 50mm in all axis. I cannot find where to set steps/mm, or what is set wrong. Using Mac, and most screens are only for PC.

Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: Half sized prints

Post by Mark » Wed Jan 27, 2016 3:37 pm

find this line of code in configuration.h tab of your firmware or find it in your LCD under the menu Control->motion -> X/Y/Z steps.
#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80, 80, 93}

Sithinion1988
Posts: 1
Joined: Sat Apr 17, 2021 6:28 pm

Re: Half sized prints

Post by Sithinion1988 » Sat Apr 17, 2021 6:31 pm

Geeetech has information about their print quality which holds Half-sized prints. So, you can get research paper help to gain more techniques to manage their quality work. Basically, it provides axis is told to move 100 mm it moves 50 mm on all axis. They are solving problems via a provided team. Join them to contact all.

Post Reply