Quality issues of your printed patrts

Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Quality issues of your printed patrts

Post by Mark » Tue Nov 24, 2015 4:35 pm

Hello guys, have you ever run into those bad printings? Now let's check the list here, there're the most common 3D printing issues and you can find the solution to solve them.
Best of all, the website is so great that they use a large collection of real-world images to make each issue easy to identify when examining your own 3D printed parts.
Here's the link:
https://www.simplify3d.com/support/prin ... eshooting/
01.jpg
01.jpg (376.37 KiB) Viewed 49537 times
02.jpg
02.jpg (344.38 KiB) Viewed 49537 times
03.jpg
03.jpg (271.11 KiB) Viewed 49537 times
Hope this will help you guys :D

liutas4x4
Posts: 13
Joined: Mon Nov 30, 2015 5:01 am

Re: Quality issues of your printed patrts

Post by liutas4x4 » Sat Dec 05, 2015 2:20 pm

+++++++

Thank you a lot.

marcpouliot
Posts: 3
Joined: Sat Jan 23, 2016 7:28 am

Re: Quality issues of your printed patrts

Post by marcpouliot » Sat Feb 27, 2016 3:48 am

Good site !!
but... It does not seem they support the geeetech Delta rostock G2S printer ??
https://www.simplify3d.com/software/supported-printers/
their software looks pretty good.
:(
I am trying to improve my printing...
it is like the density of the printout is not dense enough.
... to much space between the threads.
I am using slic3r 1. 2.9 , but do not find how to increase this "resolution".
Should I change the nozzle ? My unit was shipped with a .4 nozzle I believe.
20160226_143411.jpg
20160226_143411.jpg (303.3 KiB) Viewed 48513 times

Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: Quality issues of your printed patrts

Post by Mark » Mon Feb 29, 2016 11:53 pm

seems like your nozzle diameter is not correct, are you sure it is a 0.4 mm one? and you need to set it in both of the slic3r and printer settings.
Also, maybe the setting "extrusion multiplier" under the Filament settings will help:
160229234850.jpg
160229234850.jpg (20.4 KiB) Viewed 48510 times

User avatar
christspringer271
Posts: 6
Joined: Fri May 20, 2016 11:02 pm
Location: 2879 Christie Way Quincy, MA 02169
Contact:

Re: Quality issues of your printed patrts

Post by christspringer271 » Wed May 25, 2016 10:39 pm

I experienced once on over heating. :( Thank you its such a big help.

davi
Posts: 4
Joined: Mon Jun 06, 2016 12:06 pm

Re: Quality issues of your printed patrts

Post by davi » Wed Jun 08, 2016 11:39 am

Hi guys. I have a Rostock Mini (http://www.geeetech.com/wiki/index.php/ ... stock_mini).

I would like to have some tips on which way to go to improve my print quality.

Image

Information that might be relevant:

I´m using 1.75 mm filament
Nozzle diameter is 0.3 mm
I have no fan at the nozzle region neither at the bed.

Nozzle temperature: 200 ºC
Heated bed temperature: 55 ºC
DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 80, 480}
Slicer: Slic3r

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Quality issues of your printed patrts

Post by William » Wed Jun 08, 2016 11:58 am

Maybe you can have a look at the web Mark gave.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

RecordBrownie
Posts: 3
Joined: Fri Mar 03, 2017 4:30 pm

Re: Quality issues of your printed patrts

Post by RecordBrownie » Fri Mar 03, 2017 4:51 pm

I also got lots of troubles about those printers tools... now I solve these problems by researching many sites, I represent a brand merchant named Dewang specializing in the wholesaling and retailing the latest 3D developing printing technology, the company has two operations parts-domestic trade in China mainland and foreign trade, mainly engages in foreign trade field. I got help from this site maybe it can help you too... https://bestseekers.com/best-affordable-3d-printer/

RedMark
Posts: 1
Joined: Tue Jul 04, 2017 4:02 pm

Re: Quality issues of your printed patrts

Post by RedMark » Wed Jul 12, 2017 12:10 am

Hi all :)
It's been a week since I bought this printer and my first job was to print an M6 bolt threated but, unfortunatelly, seems not good about details :(
In facts, the steel nut, doesn't fit properly. IMHO, theese details are very importants to appreciate any 3d printer, like, also, some gears :)
What are your impressions for theese jobs? Can I hope for better?
Thanks in advance :)

Xaroos
Posts: 10
Joined: Sun Jul 09, 2017 7:48 am

Re: Quality issues of your printed patrts

Post by Xaroos » Sat Jul 22, 2017 11:15 am

HI
I have a I3 pro C that i havent been able to get any prints from it till now
this is mostly what im getting (see images)seems that it does not feed enough material.
the bed is set to 60 and the extruder to 200 degrees.
the extruder came without one ofthe white tubes that you feed the filemant in and thats the one printed this objects,
No 1 is a PEZ , no 2 is a cube with a hole in it.
13.jpg
13.jpg (834.73 KiB) Viewed 42943 times
12.jpg
12.jpg (198.94 KiB) Viewed 42943 times
any hints

Post Reply