Hi everyone,
I recently bought a Geeetech Prusa I3 Pro B and after some little problems I tried to make my first 3D print!
Unfortunately I encountered a problem that I cannot explain.
After some minutes from the start of the print I heard a noise and the Y axis lost its correct reference, printing the rest of the object not aligned (then I stopped the print, but probably the problem could happen again).
I attached a photo to show the problem, I hope you can help me because I really don't know how to solve it!
Thanks a lot in advance!
Prusa I3 Pro B - Problem with Y axis
Prusa I3 Pro B - Problem with Y axis
- Attachments
-
- IMG_5227.jpg (79.01 KiB) Viewed 24876 times
Re: Prusa I3 Pro B - Problem with Y axis
Hi,please check this link which is related to your case:https://www.geeetech.com/wiki/index.php ... salignment.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
![Smile :)](./images/smilies/icon_e_smile.gif)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Prusa I3 Pro B - Problem with Y axis
I have the same problem.
Is there a solution for this problem?
Is there a solution for this problem?
Re: Prusa I3 Pro B - Problem with Y axis
Hello.
this is called layers shifting, it can be solved successfully.
![Wink ;)](./images/smilies/icon_e_wink.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
this is called layers shifting, it can be solved successfully.
![Wink ;)](./images/smilies/icon_e_wink.gif)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: Prusa I3 Pro B - Problem with Y axis
@_kaktus_ and do you have any idea how this can be solved successfully?
Re: Prusa I3 Pro B - Problem with Y axis
Hi,you can
1. check the tightness of your belt and make the appropriate adjustments;
2. Check whether the bearing and the pulley are issued, and the card can be lubricated for lubrication;
3. The printing speed is appropriately slowed down, the reference range is 30-60mm/s;
4.Driver board voltage range 0.8-1.2V
1. check the tightness of your belt and make the appropriate adjustments;
2. Check whether the bearing and the pulley are issued, and the card can be lubricated for lubrication;
3. The printing speed is appropriately slowed down, the reference range is 30-60mm/s;
4.Driver board voltage range 0.8-1.2V
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
![Smile :)](./images/smilies/icon_e_smile.gif)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Prusa I3 Pro B - Problem with Y axis
Hi
And William did it for me.
I would add one more important point. Read more of this forum.
Maybe not all the information will be useful at this stage, but nevertheless.
Have you already found a subforum for your printer model
Greetings to you, sir.
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
And William did it for me.
I would add one more important point. Read more of this forum.
Maybe not all the information will be useful at this stage, but nevertheless.
![Wink ;)](./images/smilies/icon_e_wink.gif)
Have you already found a subforum for your printer model
![Question :?:](./images/smilies/icon_question.gif)
Greetings to you, sir.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: Prusa I3 Pro B - Problem with Y axis
I got it. My Stepmotor Driver (a4988) was faulty.
Now my Printer works again.
Now my Printer works again.
Re: Prusa I3 Pro B - Problem with Y axis
Hi.
It's nice of you to tell us about the solution to your case.
![Wink ;)](./images/smilies/icon_e_wink.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
It's nice of you to tell us about the solution to your case.
![Wink ;)](./images/smilies/icon_e_wink.gif)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.