Little problem: pwm fan doesn't work.

Post Reply
Lorenzo
Posts: 8
Joined: Wed Oct 21, 2015 3:55 pm

Little problem: pwm fan doesn't work.

Post by Lorenzo » Thu Apr 20, 2017 4:02 pm

Hi guys! :)
i'm a proud owner of a Geeetech I3X and i have a little problem. I have a classic 50mm fan with a 3 poles connector (12v, gnd, and pwm??(yellow wire) ). When i connect it to the PWM-FAN port and try to change speed with Repetier-Host, the fan runs at the maximum power and it does not seem to change speed. Which could be the problem? There is a particular setting in Marlin firmware to enable the fan or there is something else?

Thank you for support!

Lorenzo :)

Post Reply