Heating plate doesn't work

Post Reply
Theemy45
Posts: 2
Joined: Thu Jan 12, 2017 3:32 pm

Heating plate doesn't work

Post by Theemy45 » Thu Jan 12, 2017 3:58 pm

Hello everyone,

I received and installed my 3D printer I3 pro B. After the first use I realized that the heating plate did not rise in temperature. In the attached picture, it can be seen that, despite a set temperature of 100 ° C, the plate remains at 20 ° C.
I had already checked the connections between the board and the plate, all seems correct.

Maybe someone can help me here ?

Thanks,
Attachments
16010347_10209509138398818_729714275_o.jpg
16010347_10209509138398818_729714275_o.jpg (47.72 KiB) Viewed 1860 times

bang
Posts: 402
Joined: Wed Dec 28, 2016 2:12 pm

Re: Heating plate doesn't work

Post by bang » Wed Jan 18, 2017 12:00 pm

Did you connect the heating cable to the right connector on the board?
Maybe you can attach a picture of your wiring.

Theemy45
Posts: 2
Joined: Thu Jan 12, 2017 3:32 pm

Re: Heating plate doesn't work

Post by Theemy45 » Wed Jan 18, 2017 8:24 pm

Hi,

Actually I found the problem, and it was actually the wiring as you said.

Thank you for your assistance

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests