Rostock 301 Settings

Post Reply
Friggy
Posts: 5
Joined: Sun Dec 04, 2016 7:23 am

Rostock 301 Settings

Post by Friggy » Wed Dec 28, 2016 8:34 pm

Hy,

I am Simon from Austria and i print normally with a bq Witbox 2,
but some weeks ago i bought a Rostock 301 on Aliexpress, because of the Mix Features,
but i have some Troubles with it and i don't know the right Settings and i would be glad for help!


I apologize in advance for my bad English ;-)

Questions:

1. How to set exactly the middle of the platform?
2. What do the abbreviations in the Settings mean?
-> Amax E? V.- jerk? Effector offs? Carriage Offs? Delta Radius) Print Radius?.... What would be the correct settings?
3. How many Esteps/mm? I use this Gearbox: http://www.omc-stepperonline.com/gear-r ... -p-40.html

Simon
Attachments
Bild4.jpg
Bild4.jpg (57.85 KiB) Viewed 7274 times
Bild3.jpg
Bild3.jpg (42.3 KiB) Viewed 7274 times
Bild2.jpg
Bild2.jpg (53.71 KiB) Viewed 7274 times
Bild1.jpg
Bild1.jpg (55.11 KiB) Viewed 7274 times

Cup
Posts: 123
Joined: Fri Jul 15, 2016 6:11 pm

Re: Rostock 301 Settings

Post by Cup » Fri Dec 30, 2016 10:59 am

Friggy wrote:Hy,

I am Simon from Austria and i print normally with a bq Witbox 2,
but some weeks ago i bought a Rostock 301 on Aliexpress, because of the Mix Features,
but i have some Troubles with it and i don't know the right Settings and i would be glad for help!


I apologize in advance for my bad English ;-)

Questions:

1. How to set exactly the middle of the platform?
2. What do the abbreviations in the Settings mean?
-> Amax E? V.- jerk? Effector offs? Carriage Offs? Delta Radius) Print Radius?.... What would be the correct settings?
3. How many Esteps/mm? I use this Gearbox: http://www.omc-stepperonline.com/gear-r ... -p-40.html

Simon
Hi,Simon
About the settings,just keep them the default values.
Don't modify them arbitrarily.

Friggy
Posts: 5
Joined: Sun Dec 04, 2016 7:23 am

Re: Rostock 301 Settings

Post by Friggy » Fri Dec 30, 2016 6:50 pm

Hy Cup,

OK i've done it!

But how about the other Questions?

Diagonal Rod is now 188, i've measured 200!?

Simon

User avatar
Lami René
Posts: 195
Joined: Mon Sep 26, 2016 6:47 pm
Location: Sherbrooke, Québec, Canada

Re: Rostock 301 Settings

Post by Lami René » Sun Jan 01, 2017 8:16 am

Hello Simon Friggy,
Bonjour Simon Friggy,

You can find the original text into English following this original French text.

Vous trouverez le texte original traduit en anglais à la suite du présent texte original en français.

Je suis moi aussi nouveau avec l'imprimante comme et en attente de réponses de la part du personnel de Geeetech.

Voici une transcription de la structure des menus de l'écran LCD de l'imprimante 301 qui inclut mes paramètres actuels :
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Geeetech 301 Configuration du micrologiciel.txt
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Prepare ->
- Disable Steppers
- Auto Home
- Preheat PLA
- Preheat ABS
- Cooldown

- Move Axis ->
-- Move 10mm ->

--- Move X ->
---- X : 0.0

--- Move Y ->
---- Y : 0.0

--- Move Z ->
---- Z : 0.0

-- Move 1mm ->

--- Move X ->
---- X : 0.0

--- Move Y ->
---- Y : 0.0

--- Move Z ->
---- Z : 0.0

--- Extruder 0 ->
---- Extruder 0 : 0.0

--- Extruder 1 ->
---- Extruder 1 : 0.0

--- Extruder 2 ->
---- Extruder 2 : 0.0

-- Move 0.1mm ->

--- Move X ->
---- X : 0.0

--- Move Y ->
---- Y : 0.0

--- Move Z ->
---- Z : 0.0

--- Extruder 0 ->
---- Extruder 0 : 0.0

--- Extruder 1 ->
---- Extruder 1 : 0.0

--- Extruder 2 ->
---- Extruder 2 : 0.0

Control ->

- Temperature ->
-- Nozzle : 0
-- Bed : 0
-- Fan speed : 0
-- Autotemp : Off
-- Min : 215
-- Max : 250
-- Fact :

-- N-PID ->
--- N-PID-P : +0608.05
--- N-PID-I : +0036.63
--- N-PID-D : +2709.19

-- B-PID ->
--- B-PID-P : +0369.61
--- B-PID-I : +0054.13
--- B-PID-D : +0602.87

-- Preheat PLA Conf ->
--- Fan speed : 0
--- Nozzle : 215
--- Bed : 70

-- Preheat ABS Conf ->
--- Fan speed : 0
--- Nozzle : 240
--- Bed : 95

- Printer Setting ->
-- X Max : 300
-- X Min : 0
-- Y Max : 300
-- Y Min : 0
-- Z Max : 228
-- Z Min : 0
-- Home X : Max
-- Home Y : Max
-- Home Z : Max
-- X Motor Dir : True
-- Y Motor Dir : True
-- Z Motor Dir : False
-- E Motor Dir : True
-- E1 Motor Dir : True
-- E2 Motor Dir : True

-- XmaxEndstop ->
--- Logic level : High
--- Status : NC

-- XminEndstop ->
--- Logic level : High
--- Status : NC

-- YmaxEndstop ->
--- Logic level : High
--- Status : NC

-- YminEndstop ->
--- Logic level : High
--- Status : NC

-- ZmaxEndstop ->
--- Logic level : High
--- Status : NC

-- ZminEndstop ->
--- Logic level : High
--- Status : NC

-- Delta ->
--- Segments/sec : 200
--- Diagonal Rod : 197
--- Smooth offs : 160
--- Effector offs : 33
--- Carriage offs : 33
--- Delta Radius : 94.0
--- Print Radius : 90

-- Motion ->
--- Z offset : 0.00
--- Accel : 5000
--- Vx-jerk : 20
--- Vy-jerk : 20
--- Vz-jerk : 20
--- Ve-jerk : 5
--- Vmax X : 400
--- Vmax Y : 400
--- Vmax Z : 400
--- Vmax E : 1000
--- Vmin : 5
--- VTrav min : 5
--- Amax X : 5000
--- Amax Y : 5000
--- Amax Z : 5000
--- Amax E : 800
--- A-retract : 3000
--- Xsteps/mm : 80.26
--- Ysteps/mm : 80.26
--- Zsteps/mm : 80.26
--- Esteps/mm : 95.00
--- Home speed X : 360
--- Home speed Y : 360
--- Home speed Z : 360

-- Store Memorie

-- Restore Default

-- Version
--- Firmeware 1.0.02

- Mixer ->
-- Filament 0 : 100%
-- Filament 1 : 0%
-- Filament 2 : 0%

-- OFP ->
--- OFP Max : 100%
--- OFP Min : 0%
--- Store Memory

-- Temptates ->
--- Temptates 1
--- Temptates 2
--- Temptates 3
--- Temptates 4
--- Temptates 5
--- Temptates 6
--- Temptates 7
--- Temptates 8
--- Custom 1
--- Custom 2
--- Custom 3
--- Custom 4
--- Custom 5
--- Custom 6

-- Custum ->

--- Custom 1 Conf ->
---- Start Percent : 0%
---- End Percent : 100%
---- Start Height : 0.0
---- End Height : 100.0
---- Store Memory

--- Custom 2 Conf ->
---- Start Percent : 0%
---- End Percent : 100%
---- Start Height : 0.0
---- End Height : 100.0
---- Store Memory

--- Custom 3 Conf ->
---- Start Percent : 0%
---- End Percent : 100%
---- Start Height : 0.0
---- End Height : 100.0
---- Store Memory

--- Custom 4 Conf ->
---- Start Percent : 0%
---- End Percent : 100%
---- Start Height : 0.0
---- End Height : 100.0
---- Store Memory

--- Custom 5 Conf ->
---- Start Percent : 0%
---- End Percent : 100%
---- Start Height : 0.0
---- End Height : 100.0
---- Store Memory

--- Custom 6 Conf ->
---- Start Percent : 0%
---- End Percent : 100%
---- Start Height : 0.0
---- End Height : 100.0
---- Store Memory

No SD Card

SD Card ->
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Ma plaque chauffante d'impression en aluminium n'est pas plate, elle est concave, c'est la raison du « Delta Radius : 94.0 ».

Comme je débute avec les imprimantes 3D, je ne peux vous aidez pour les explications des différent paramètre, car je suis moi-même à la recherche des textes explicatifs, ma je ne trouve presque rien et Geeetech ne répond pas à nos demandes d'informations et des détails sur leurs produits !

Cordialement,

L'ami René
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hello Simon Friggy,

Excuse me, I am unilingual francophone and I use Google translator to translate the texts of the forum in French and to write to you in English. Thank you for your understanding and your indulgence for these texts translated mechanically!

I am also new with the printer as and waiting for answers from Geeetech staff.

Here is a transcript of the menu structure of the 301 LCD screen that includes my current settings:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Geeetech 301 Configuration du micrologiciel.txt
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Prepare ->
- Disable Steppers
- Auto Home
- Preheat PLA
- Preheat ABS
- Cooldown

- Move Axis ->
-- Move 10mm ->

--- Move X ->
---- X : 0.0

--- Move Y ->
---- Y : 0.0

--- Move Z ->
---- Z : 0.0

-- Move 1mm ->

--- Move X ->
---- X : 0.0

--- Move Y ->
---- Y : 0.0

--- Move Z ->
---- Z : 0.0

--- Extruder 0 ->
---- Extruder 0 : 0.0

--- Extruder 1 ->
---- Extruder 1 : 0.0

--- Extruder 2 ->
---- Extruder 2 : 0.0

-- Move 0.1mm ->

--- Move X ->
---- X : 0.0

--- Move Y ->
---- Y : 0.0

--- Move Z ->
---- Z : 0.0

--- Extruder 0 ->
---- Extruder 0 : 0.0

--- Extruder 1 ->
---- Extruder 1 : 0.0

--- Extruder 2 ->
---- Extruder 2 : 0.0

Control ->

- Temperature ->
-- Nozzle : 0
-- Bed : 0
-- Fan speed : 0
-- Autotemp : Off
-- Min : 215
-- Max : 250
-- Fact :

-- N-PID ->
--- N-PID-P : +0608.05
--- N-PID-I : +0036.63
--- N-PID-D : +2709.19

-- B-PID ->
--- B-PID-P : +0369.61
--- B-PID-I : +0054.13
--- B-PID-D : +0602.87

-- Preheat PLA Conf ->
--- Fan speed : 0
--- Nozzle : 215
--- Bed : 70

-- Preheat ABS Conf ->
--- Fan speed : 0
--- Nozzle : 240
--- Bed : 95

- Printer Setting ->
-- X Max : 300
-- X Min : 0
-- Y Max : 300
-- Y Min : 0
-- Z Max : 228
-- Z Min : 0
-- Home X : Max
-- Home Y : Max
-- Home Z : Max
-- X Motor Dir : True
-- Y Motor Dir : True
-- Z Motor Dir : False
-- E Motor Dir : True
-- E1 Motor Dir : True
-- E2 Motor Dir : True

-- XmaxEndstop ->
--- Logic level : High
--- Status : NC

-- XminEndstop ->
--- Logic level : High
--- Status : NC

-- YmaxEndstop ->
--- Logic level : High
--- Status : NC

-- YminEndstop ->
--- Logic level : High
--- Status : NC

-- ZmaxEndstop ->
--- Logic level : High
--- Status : NC

-- ZminEndstop ->
--- Logic level : High
--- Status : NC

-- Delta ->
--- Segments/sec : 200
--- Diagonal Rod : 197
--- Smooth offs : 160
--- Effector offs : 33
--- Carriage offs : 33
--- Delta Radius : 94.0
--- Print Radius : 90

-- Motion ->
--- Z offset : 0.00
--- Accel : 5000
--- Vx-jerk : 20
--- Vy-jerk : 20
--- Vz-jerk : 20
--- Ve-jerk : 5
--- Vmax X : 400
--- Vmax Y : 400
--- Vmax Z : 400
--- Vmax E : 1000
--- Vmin : 5
--- VTrav min : 5
--- Amax X : 5000
--- Amax Y : 5000
--- Amax Z : 5000
--- Amax E : 800
--- A-retract : 3000
--- Xsteps/mm : 80.26
--- Ysteps/mm : 80.26
--- Zsteps/mm : 80.26
--- Esteps/mm : 95.00
--- Home speed X : 360
--- Home speed Y : 360
--- Home speed Z : 360

-- Store Memorie

-- Restore Default

-- Version
--- Firmeware 1.0.02

- Mixer ->
-- Filament 0 : 100%
-- Filament 1 : 0%
-- Filament 2 : 0%

-- OFP ->
--- OFP Max : 100%
--- OFP Min : 0%
--- Store Memory

-- Temptates ->
--- Temptates 1
--- Temptates 2
--- Temptates 3
--- Temptates 4
--- Temptates 5
--- Temptates 6
--- Temptates 7
--- Temptates 8
--- Custom 1
--- Custom 2
--- Custom 3
--- Custom 4
--- Custom 5
--- Custom 6

-- Custum ->

--- Custom 1 Conf ->
---- Start Percent : 0%
---- End Percent : 100%
---- Start Height : 0.0
---- End Height : 100.0
---- Store Memory

--- Custom 2 Conf ->
---- Start Percent : 0%
---- End Percent : 100%
---- Start Height : 0.0
---- End Height : 100.0
---- Store Memory

--- Custom 3 Conf ->
---- Start Percent : 0%
---- End Percent : 100%
---- Start Height : 0.0
---- End Height : 100.0
---- Store Memory

--- Custom 4 Conf ->
---- Start Percent : 0%
---- End Percent : 100%
---- Start Height : 0.0
---- End Height : 100.0
---- Store Memory

--- Custom 5 Conf ->
---- Start Percent : 0%
---- End Percent : 100%
---- Start Height : 0.0
---- End Height : 100.0
---- Store Memory

--- Custom 6 Conf ->
---- Start Percent : 0%
---- End Percent : 100%
---- Start Height : 0.0
---- End Height : 100.0
---- Store Memory

No SD Card

SD Card ->
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
My aluminum hotplate is not flat, it is concave, this is the reason for the "Delta Radius: 94.0".

As I start with the 3D printers, I can not help you with the explanations of the different settings, because I am looking for explanatory texts, but I can not find anything and Geeetech does not respond to our requests for information And details on their products!

Cordially,

Friend René
Un pour tous et tous pour un !
One for all and all for one !
-------------------------------------
Mon imprimante modifié : http://forums.reprap.org/read.php?178,781375,781375
Voir aussi pour mes pièces : https://www.thingiverse.com/thing:2464177

Friggy
Posts: 5
Joined: Sun Dec 04, 2016 7:23 am

Re: Rostock 301 Settings

Post by Friggy » Sun Jan 01, 2017 4:31 pm

Hy Rene,

My settings are almost the same!
For: Delta, Diagonal Rod I have 200.
Yesterday I set and tried many things, the 3D print now almost fits.
My Planetary Gearboxes have a good torque and now the Filament supply works,
but i dont know how much steps/mm to set, so i multiplied a factor in Slicer!

At the speeds indicated by geeetech the axis loses way (steps), so reduce the Speeds!
I tried now, print with 20mm and a travel Speed from 40mm.

With my Witbox 1 and Witbox 2 i could print 90mm/s with the right Filament,
but they were also more expensive, Nevertheless the data from geeetech do not agree!!!

Simon

User avatar
Lami René
Posts: 195
Joined: Mon Sep 26, 2016 6:47 pm
Location: Sherbrooke, Québec, Canada

Re: Rostock 301 Settings

Post by Lami René » Sun Jan 01, 2017 5:05 pm

Hello Simon Friggy,
Bonjour Simon Friggy,

You can find the original text into English following this original French text.

Vous trouverez le texte original traduit en anglais à la suite du présent texte original en français.

Je ne suis pas certain de bien comprendre ce que vous écrivez. Je vous traduis en français avec Google Traducteur. Si vous avez des sauts de pas des moteurs pas-à-pas, est-ce que vous avez procédé à l'ajustement de la force des moteurs avec le potentiomètre des pilotes de moteur ?

Cordialement,

L'ami René
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hello Simon Friggy,

Excuse me, I am unilingual francophone and I use Google translator to translate the texts of the forum in French and to write to you in English. Thank you for your understanding and your indulgence for these texts translated mechanically!

I'm not sure I understand what you're writing. I translate you in French with Google translator. If you have not hopping step-by-step motors, is that you have made the adjustment of motor power with the potentiometer motor drivers?

Cordially,

Friend René
Un pour tous et tous pour un !
One for all and all for one !
-------------------------------------
Mon imprimante modifié : http://forums.reprap.org/read.php?178,781375,781375
Voir aussi pour mes pièces : https://www.thingiverse.com/thing:2464177

Friggy
Posts: 5
Joined: Sun Dec 04, 2016 7:23 am

Re: Rostock 301 Settings

Post by Friggy » Sun Jan 01, 2017 5:24 pm

Hy Rene,

I tried to solve the Problem with the Extrusion Multiplier, i changed to 3,
because i dont know how many steps per mm.

I think it needs a better Motor with more torque for the axis too!

maybe this one: http://www.omc-stepperonline.com/3d-pri ... -p-17.html

Simon
Attachments
Filament Multiplikator.JPG
Filament Multiplikator.JPG (49.5 KiB) Viewed 7232 times

Friggy
Posts: 5
Joined: Sun Dec 04, 2016 7:23 am

Re: Rostock 301 Settings

Post by Friggy » Sun Jan 01, 2017 6:53 pm

This one is the original Stepper Motor for the axis and has got 500mNm: https://de.aliexpress.com/store/product ... 53889.html

This one, would have 650mNm and the same Shaft Diameter (5mm): http://www.omc-stepperonline.com/nema-1 ... -p-21.html

Maybe this one from the Extruder could be used, he has 600mNm: https://www.geeetech.com/hybrid-stepper ... p-947.html

Simon

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests