Problems with new 3D Printer

Post Reply
rawdy1992
Posts: 1
Joined: Wed Oct 01, 2014 1:26 am

Problems with new 3D Printer

Post by rawdy1992 » Wed Oct 01, 2014 1:35 am

Hi,

I Buy this printer: http://www.ebay.com/itm/JIETAI-Delta-Ro ... 4182bbdf69

I assemble and configure with Repetier Host. The radius of 99 mm and height of 400 mm .When pressed home all rises to endstops, but when sending XYZ to 0 the printer does nothing. To check, try print 10mm cube and starts printing from above, Z is the only that move down.

what I can do with this problem ??????????? :?:
Top
koko
Posts: 5
Joined: Tue Oct 07, 2014 5:18 pm

Re: Problems with new 3D Printer

Post by koko » Wed Oct 08, 2014 9:42 am

please makesure "printer settings">"printer shape">"printer type" is "Rostock printer" and "Home X,Home Y,Home Z" is MAX with Repetier Host.if you use slic3r ,Please amend the print center of 0, 0.
Top
Post Reply

Return to “Others”