Need printed parts files

Post Reply
FelixP
Posts: 23
Joined: Wed Jun 11, 2014 5:29 am

Need printed parts files

Post by FelixP » Thu Sep 18, 2014 12:28 am

Several parts of my mendel I3 are beginning to wear out after little more than one kg roll of filament. I would print out and replace them myself, however Geeetech is using some mutant variant of the I3 that I am not familiar with, and so I can't just find the parts on thingiverse.

Unfortunately the wear has happened so quickly that the z top pieces have worn holes due to the threaded bars turning.

Could I please get a copy or download link of the STL files Geeetech uses to print the I3 parts? or at least a link to a compatible version that works with the geeetech variant?

Alex-w
Posts: 148
Joined: Thu Jun 05, 2014 2:24 pm

Re: Need printed parts files

Post by Alex-w » Thu Sep 18, 2014 10:44 am

hi FelixP:
here is the STL files。
PI3-B12-B13-z-top-left-right.zip
(105.83 KiB) Downloaded 671 times

FelixP
Posts: 23
Joined: Wed Jun 11, 2014 5:29 am

Re: Need printed parts files

Post by FelixP » Thu Sep 18, 2014 12:22 pm

great. could I get the rest of the files as well? they aren't needed direly atm, but I will need them in the future.

Alex-w
Posts: 148
Joined: Thu Jun 05, 2014 2:24 pm

Re: Need printed parts files

Post by Alex-w » Fri Sep 19, 2014 4:02 pm

hi man:
Sorry, I can not all published at present. we will publish in the wiki after two or three months

FelixP
Posts: 23
Joined: Wed Jun 11, 2014 5:29 am

Re: Need printed parts files

Post by FelixP » Thu Sep 25, 2014 9:02 am

can I at least get all of the x axis parts, since they are going to be the next to wear out?

Post Reply