FYSETC mini12864 v2.1 and GT2560 A+

Post Reply
Softfoot
Posts: 26
Joined: Tue Oct 01, 2019 6:42 pm

FYSETC mini12864 v2.1 and GT2560 A+

Post by Softfoot » Wed Mar 04, 2020 4:44 am

Hi, I have a Geeetech i3 pro c with a GT2560 A+ card that works well with the supplied LCD2004 display.

I would like to fit a FYSETC Mini1284 display that I have (its the v2.1 version).

I have tried various combinations of settings that seem to apply to this full graphics controller but while the backlight comes on and the SD card is recognized the display remains blank.

At first I had problems uploading when the 12864 was plugged in but removing R4 from the 12864 fixed that.

Has anyone got this combination working ?? If so what setting do I need to make to the config files ??

Best regards,
Dave

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: FYSETC mini12864 v2.1 and GT2560 A+

Post by William » Wed Mar 04, 2020 9:24 am

Hi,you need to use a 2004 screen, and the screen you replaced does not match the model.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply