I3 PRO B Display not working

Klassr
Posts: 8
Joined: Wed Jan 01, 2020 11:14 pm

I3 PRO B Display not working

Post by Klassr » Thu Jan 02, 2020 12:41 am

Hello, I've assembled my new I3 Pro B within the last days. After finally switching it on only the fans are working and a green light is on. The LCD display did not show anything. The type of the LCD is different than mentioned in the PDF assebly ionstruction. I've attached two pictures showing assembly of the flat cable on the LCD connector and the controller board.

Not sure if I missed something or maybe used the wrong connector.

Maybe anybody can guide me the right way

Klassr
Posts: 8
Joined: Wed Jan 01, 2020 11:14 pm

Re: I3 PRO B Display not working

Post by Klassr » Thu Jan 02, 2020 12:52 am

Added pictures
Attachments
IMG_20200101_155538.jpg
IMG_20200101_155538.jpg (264.78 KiB) Viewed 21151 times
IMG_20200101_154735.jpg
IMG_20200101_154735.jpg (153.5 KiB) Viewed 21151 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: I3 PRO B Display not working

Post by William » Thu Jan 02, 2020 9:17 am

:D Hi, You can check if your screen wiring is reversed.
Adjust the voltage range you need before turning on the printer;
Turn on the printer to see if three lights on the motherboard are on.

You can refer to:
A+ 三灯亮起的位置.jpg
A+ 三灯亮起的位置.jpg (1.43 MiB) Viewed 21140 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Klassr
Posts: 8
Joined: Wed Jan 01, 2020 11:14 pm

Re: I3 PRO B Display not working

Post by Klassr » Thu Jan 02, 2020 7:55 pm

Hello William,

Ve and VB are on, 5V is off.

Do you have a pin layout for the wiring? I checked pin 1 and 2. Looks like Pin 1 is power and Pin 2 is Ground in both connectors. but verifýing would be easier with a proper pin layout.

Reimund

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: I3 PRO B Display not working

Post by William » Fri Jan 03, 2020 9:07 am

:D Hi, for the schematic you can refer to this: https://www.geeetech.com/download.html?download_id=43

If the 5v light on the motherboard is off, the screen will not light up properly.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Klassr
Posts: 8
Joined: Wed Jan 01, 2020 11:14 pm

Re: I3 PRO B Display not working

Post by Klassr » Fri Jan 03, 2020 3:02 pm

William, and now? Who is taking care about any next step? Who shall I contact for replacement? This is a new device, I do not want to just buy a new Controller board on my own.

Best regards

Reimund

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: I3 PRO B Display not working

Post by William » Fri Jan 03, 2020 3:04 pm

:D Hi,You can provide your purchase method, country,
Order number and email, we will help you.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Klassr
Posts: 8
Joined: Wed Jan 01, 2020 11:14 pm

Re: I3 PRO B Display not working

Post by Klassr » Fri Jan 03, 2020 3:46 pm

Hello William,

thank you very much

Order number is: 304-3732564-9113100 (via Amazon)
mail address: reimund.klass@t-online.de
Country is Germany

Home address would be available in my profile or to be sent by mail

Reimund

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: I3 PRO B Display not working

Post by William » Fri Jan 03, 2020 3:53 pm

:D Hi, I have reported the situation to my colleagues,
Will contact you.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Klassr
Posts: 8
Joined: Wed Jan 01, 2020 11:14 pm

Re: I3 PRO B Display not working

Post by Klassr » Fri Jan 03, 2020 3:57 pm

Thank you very much. Very well appreciated

Reimund

Post Reply