Sleep?

Post Reply
Kiiski
Posts: 0
Joined: Wed Mar 21, 2018 1:18 pm

Sleep?

Post by Kiiski » Wed Mar 21, 2018 1:25 pm

Hello,
I have a i3 Pro W and recently, when nearing the end of a print the extruder will move up and away from the print, sit there for a few seconds then resume printing. During this time it says "sleep" on the LCD. Tonight it did it 6 times before finishing a print. Does anyone know what is happening and how I can fix it,
Thanks in advance,
Kiiski

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Sleep?

Post by William » Wed Mar 21, 2018 2:45 pm

You can upload the correct firmware and then tell print it via USB port
You can use Repetier-Host to get more details
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

hpsupport12
Posts: 0
Joined: Wed Apr 18, 2018 1:16 am

Re: Sleep?

Post by hpsupport12 » Wed Apr 18, 2018 1:25 am

I do not understand the sleep mode. Why my laptop is always going into the sleep mode. When I face a problem then I generally use support or services to get the solution. Recently, I used HP Printer Support and get the solution for my HP Printer problem by using the number +44-800-046-5291 and the service providers easily solve my issue on call.
http://hpprintersupportnumbers.co.uk

Post Reply