Hi Guys!
Display showing me just start page. When i push the selector it does not opening menu.
RepRAp smartcontroller problem LCD204
RepRAp smartcontroller problem LCD204
- Attachments
-
- IMG_6551-05-04-17-07-13.jpeg (147.87 KiB) Viewed 6668 times
Re: RepRAp smartcontroller problem LCD204
Hi,as to the MINTEMP error,you can check this post to vertify:viewtopic.php?f=23&t=17030.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: RepRAp smartcontroller problem LCD204
Thank you! But MINTEMP is not problem for now. Somebody can help me? Everithing is good. Libraries in fine. Firmware is right.
Re: RepRAp smartcontroller problem LCD204
Hi,in your case,there maybe some bad connection between the LCD and board.Please double check it.
If it still don't work,could you make your problem into a video in order to help you better?Please as much detail as possible.
If it still don't work,could you make your problem into a video in order to help you better?Please as much detail as possible.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: RepRAp smartcontroller problem LCD204
I checked it with three different sets (panels and wires). Now i think problem is in my board.
You can see video by link (sorry i tried to upload video on site, but it never happened)
https://youtu.be/JjYgsRfWGHg
You can see video by link (sorry i tried to upload video on site, but it never happened)
https://youtu.be/JjYgsRfWGHg