The switch of disappointment.

Post Reply
Thomas.Humphries
Posts: 0
Joined: Thu Jan 11, 2018 6:58 am

The switch of disappointment.

Post by Thomas.Humphries » Thu Feb 08, 2018 10:33 pm

After running through the manual twice and making sure I have build my little printer (I3 Pro C) correctly, I turn it on.

The main power switch turns on but NOTHING shows from the arduino..

NO LCD turns on no beep no nothing, does this mean I have to upload a new firmware to this printer via USB?

Currently I am still 'fitting' over which I want. IS Marlin good? What is the default option?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: The switch of disappointment.

Post by William » Fri Feb 09, 2018 5:20 pm

You should download the firmware by forum and then upload it to your printer
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply