For people who wants STL files of parts

chase
Posts: 32
Joined: Sat Jul 16, 2016 10:57 pm

Re: For people who wants STL files of parts

Post by chase » Fri Jul 22, 2016 9:30 pm

The "8mm" refers to the acrylic frame thickness. I guess there was a another acrylic frame that was made from thinner material.

That's how it was listed on the Geeetech site.
At least a couple weeks ago it was. All the new 2016 models are on the site now.

And wouldn't you know the new Pro B was listed on site less than a week after I bought/received mine. (I didn't buy direct) Hence I'm looking at the all metal upgrade kit to add onto mine to bring it up to date.

Anyway...

chase
Posts: 32
Joined: Sat Jul 16, 2016 10:57 pm

Re: For people who wants STL files of parts

Post by chase » Sun Jul 24, 2016 3:03 am

Never mind, I found the ones for the i3 Pro B over at Thingiverse. This way I can print out what I need until the all metal upgrade for it arrives.

websmr
Posts: 10
Joined: Wed Sep 14, 2016 1:25 am

Re: For people who wants STL files of parts

Post by websmr » Wed Sep 14, 2016 1:34 am

Hi!

I just bought a Geeetech I3 Acrylic pro B

where can i get the stl? I would like to save a copy just in case.

thanks!

User avatar
William
Site Admin
Posts: 5130
Joined: Tue Jun 07, 2016 9:38 am

Re: For people who wants STL files of parts

Post by William » Wed Sep 14, 2016 9:47 am

Hi,
Here it is:
I3 B STL.zip
(1.84 MiB) Downloaded 470 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

daveapplemotors
Posts: 76
Joined: Tue Aug 16, 2016 11:36 pm

Re: For people who wants STL files of parts

Post by daveapplemotors » Sat Sep 17, 2016 7:14 pm

Please send me files for the X belt gripper for my Geeetech Prusa i3 pro Aluminum printer.

My X belt gripper fails. The belt comes out but I am using CA glue to keep the it in place for now. I want to print a new gripper with ABS. Will ABS be better than PLA if the temperature is 40-45 degrees?

thank you very much,
Dave Dutton

User avatar
William
Site Admin
Posts: 5130
Joined: Tue Jun 07, 2016 9:38 am

Re: For people who wants STL files of parts

Post by William » Sun Sep 18, 2016 8:53 am

-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

websmr
Posts: 10
Joined: Wed Sep 14, 2016 1:25 am

Re: For people who wants STL files of parts

Post by websmr » Sun Sep 18, 2016 6:22 pm

Thanks Willian!

azzraell
Posts: 4
Joined: Tue Dec 01, 2015 5:43 am

Re: For people who wants STL files of parts

Post by azzraell » Tue Oct 25, 2016 2:47 am

thanks for the parts .stl file! should this parts be printed with 100% infill? thanks!

User avatar
William
Site Admin
Posts: 5130
Joined: Tue Jun 07, 2016 9:38 am

Re: For people who wants STL files of parts

Post by William » Tue Oct 25, 2016 11:36 am

Infilling 100% should be stabler.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

KiloVolT
Posts: 1
Joined: Tue Jan 17, 2017 9:26 pm

Re: For people who wants STL files of parts

Post by KiloVolT » Wed Jan 18, 2017 9:56 pm

Hello!
Can anyone post a link to MeCreator2 plastic parts stl?
My printer came broken and i want to order printnig because it faster then wait for replacement parts from seller.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests