Infill Settings - EasyPrint3D 1.2.6

Post Reply
BubbleButt
Posts: 3
Joined: Wed Oct 30, 2019 3:36 am

Infill Settings - EasyPrint3D 1.2.6

Post by BubbleButt » Wed Oct 30, 2019 3:43 am

Hello,

at first of all I want to introduce myself. My Name is Selim and I'm new to 3D-printing.
My first printer is the Geeetech A10 (latest version). The first impressions are amazing and the results are almost perfect :lol:
But I can't find the setting to change the percentage of infill in the latest version of easyprint 3D which is 1.2.6.
Can somebody of you explain me how to change the infill-settings?
For example if I want to use a thingiverse object with a recommended setting for infillment of 20% (0.2).

Thank you and best regards!

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Infill Settings - EasyPrint3D 1.2.6

Post by William » Wed Oct 30, 2019 9:32 am

Hi, I think you mean this:
21U2J%F)Z@K_ZA(OQ4UG]HB.png
21U2J%F)Z@K_ZA(OQ4UG]HB.png (61.68 KiB) Viewed 11451 times
I hope this can help you.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

BubbleButt
Posts: 3
Joined: Wed Oct 30, 2019 3:36 am

Re: Infill Settings - EasyPrint3D 1.2.6

Post by BubbleButt » Tue Nov 05, 2019 6:54 pm

William wrote:
Wed Oct 30, 2019 9:32 am
Hi, I think you mean this:
21U2J%F)Z@K_ZA(OQ4UG]HB.png
I hope this can help you.
Hello,

thanks for the help.
But the overlay is not in % or am I wrong?

Best Regards

protocol
Posts: 3
Joined: Sat Dec 07, 2019 2:16 am

Re: Infill Settings - EasyPrint3D 1.2.6

Post by protocol » Sun Dec 08, 2019 1:34 am

There is a bug with the infill setting, you cannot disable it by entering '0', you see an error "invalid parameters".

Please fix, I need to be able to disable infill.

Post Reply