SD card issues?

Daryl
Posts: 13
Joined: Wed Mar 13, 2019 6:42 pm

SD card issues?

Post by Daryl » Sat Jun 29, 2019 6:25 pm

Hello everyone,,,
i bought a Geeetech Prusa i3 X a month ago and im trying to get a print out of it. I started using USB cable but realized that Pronterface and Repetier made random errors and stopped in long lasting prints. Then i tried the SD card. The SD card prints the first layer and then withdraw the filament enough in order for the filament not being able to get down again. (same problem as this guy I think: http://www.geeetech.com/forum/viewtopic ... ard#p30622) I checked my G-code, that’s not the problem, I have tried with 3 different SD-card, one that worked (borrowed one from my job) and 2 that didn’t work. (both with the same problem and all 3 cards with the same file.) It seems like the printer skips some G-code or something.
The firmware is marlin, and it is up to date.xvideos.onl/ xnxx.onl/ chaturbate.onl/

User avatar
William
Site Admin
Posts: 3958
Joined: Tue Jun 07, 2016 9:38 am

Re: SD card issues?

Post by William » Mon Jul 01, 2019 9:28 am

Hi, Is there a problem with all the models printed, or is it always a model?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

MikeMoans
Posts: 10
Joined: Mon Jul 01, 2019 4:57 pm

Re: SD card issues?

Post by MikeMoans » Mon Jul 01, 2019 5:01 pm

I have just opened my A30 fresh out of the box and tried to run the provided prints on the provided card. The machine isnt recognising the card. If i reboot the machine it does for a second or 2 before it then comes up blank

any solutions? really dont want to have to return a massive printer for a small issue but i cant use usb as i cant fit the machine in the pc office

User avatar
William
Site Admin
Posts: 3958
Joined: Tue Jun 07, 2016 9:38 am

Re: SD card issues?

Post by William » Mon Jul 01, 2019 5:06 pm

Hi, you can try to re-flash the firmware for viewing.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

MikeMoans
Posts: 10
Joined: Mon Jul 01, 2019 4:57 pm

Re: SD card issues?

Post by MikeMoans » Mon Jul 01, 2019 5:39 pm

do you have a guide for that?

User avatar
William
Site Admin
Posts: 3958
Joined: Tue Jun 07, 2016 9:38 am

Re: SD card issues?

Post by William » Mon Jul 01, 2019 5:43 pm

-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

MikeMoans
Posts: 10
Joined: Mon Jul 01, 2019 4:57 pm

Re: SD card issues?

Post by MikeMoans » Tue Jul 02, 2019 4:39 pm

all i am getting is a 'upgrading failed detail: cannot open serial port'

I should'nt be having so much trouble with a printer out the box that should be set up and go with the provided test prints on the provided card. Really getting frustrated so appreciate the help

User avatar
William
Site Admin
Posts: 3958
Joined: Tue Jun 07, 2016 9:38 am

Re: SD card issues?

Post by William » Tue Jul 02, 2019 4:44 pm

Hi, You can check if your USB cable is well connected and may not be able to read the serial port due to poor contact.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

MikeMoans
Posts: 10
Joined: Mon Jul 01, 2019 4:57 pm

Re: SD card issues?

Post by MikeMoans » Tue Jul 02, 2019 4:55 pm

tried 3 different pc ports and connections great on them all normally

MikeMoans
Posts: 10
Joined: Mon Jul 01, 2019 4:57 pm

Re: SD card issues?

Post by MikeMoans » Tue Jul 02, 2019 6:00 pm

installed new driver software and the a30_VD_S_v1_57 firmware

still no luck reading files on the printer

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest