G2s Pro Firmware update via 3-in-1 control box blanks display.

Post Reply
isjohn
Posts: 2
Joined: Tue Mar 12, 2019 5:21 am

G2s Pro Firmware update via 3-in-1 control box blanks display.

Post by isjohn » Tue Mar 12, 2019 11:53 am

I apologise in advance if this issue has been addressed elsewhere.

I am attempting to updated the firmware on a newly assembled G2S Pro with a 3 in 1 control box to 1.0.04 using Easyprint 3D. The process run through fine but the display on the 3 in 1 is left blank. I have resolved the issue by reverting back to a modified (to support the 12864 display) 1.0.3 Marlin firmware but I now am seeking assistance with obtaining the current firmware image file for the G2S Pro / 3 in 1 control box combination . Is it available or has this combination been overlooked by the software developers?

Any assistance would be appreciated.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: G2s Pro Firmware update via 3-in-1 control box blanks display.

Post by William » Fri Apr 26, 2019 5:52 pm

Hi, the EasyPrinter 3D is too old, I advise to use Cura.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply