Page 1 of 1

EasyPrint Error-Cura Engine Didn't Work

Posted: Sun Jan 20, 2019 2:07 am
by cpschmitt
We've connected to an E180 with EasyPrint 3D, and when going to slice, it gives an error message "Cura Engine Didn't Work - Please Try Again". We tried rebooting and updating firmware, but can only update mainboard successfully (it loses connection to printer as it reboots before LCD update finishes). Any suggestions?

Re: EasyPrint Error-Cura Engine Didn't Work

Posted: Wed Feb 13, 2019 12:15 am
by Le Dono
I get the exact same error. Let me know if you figured it out.
I'm currently downloading the real cura.

I tried 1.2.3 and 1.2.6 to no avail.

Re: EasyPrint Error-Cura Engine Didn't Work

Posted: Thu Feb 14, 2019 4:19 am
by _kaktus_
Hi.
:mrgreen:
Gentlemen, the error here is one thing. However, updating the firmware is a completely different matter.

The first bug may depend on the version of your OS.
It seems to me that a user solved a similar problem and described it on the forum. ;)