Geeetech

Posted: **Tue Nov 29, 2016 6:36 pm**

Hi guys, i'm testing the new version of slic3r prusa version on my prusa i3 Pro B and i'm having a hard time find the right settings, can you help me?

many thanks

Posted: **Tue Dec 06, 2016 2:40 pm**

Try the attached config(for nozzle size 0.3 and 0.4mm):

I3 B-PLA-0.4-1.75.zip: (1.35 KiB) Downloaded 5305 times

I3 B-PLA-0.3-1.75.zip: (2.85 KiB) Downloaded 4285 times

Posted: **Sat Nov 10, 2018 10:28 pm**

Hi!

Do you have configurations for ABS and SBS?

Posted: **Tue Nov 13, 2018 9:27 am**

TurboJoke wrote: ↑
Sat Nov 10, 2018 10:28 pm
Hi!

Do you have configurations for ABS and SBS?

For ABS:You need to set the first layer to 0.2mm.
Then you need to set the nozzle temp to 230~260C.
For heat bed:90~100C

But I didn't try to use SBS ,I can't give you more suggestion for it.

Geeetech

Slic3r setting for I3 Pro B

Slic3r setting for I3 Pro B

Re: Slic3r setting for I3 Pro B

Re: Slic3r setting for I3 Pro B

Re: Slic3r setting for I3 Pro B