Prusa I3 X - Simplify3D Profile

Post Reply
jeremy450
Posts: 8
Joined: Mon Jun 27, 2016 3:06 am

Prusa I3 X - Simplify3D Profile

Post by jeremy450 » Mon Jun 27, 2016 3:09 am

Hey There

Does anyone have a Simplify3D a profile for the Prusa I3 X?

Thanks

regards
Jeremy

User avatar
William
Site Admin
Posts: 6331
Joined: Tue Jun 07, 2016 9:38 am

Re: Prusa I3 X - Simplify3D Profile

Post by William » Mon Jun 27, 2016 11:21 am

jeremy450 wrote:Hey There

Does anyone have a Simplify3D a profile for the Prusa I3 X?

Thanks

regards
Jeremy
Why not try Repetier-Host?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

syossi2
Posts: 73
Joined: Sun Apr 03, 2016 4:00 pm

Re: Prusa I3 X - Simplify3D Profile

Post by syossi2 » Mon Jun 27, 2016 3:31 pm

i use simplfy3d on my m201 works great !!!!!
printing 3D with M201 Geeetech

jeremy450
Posts: 8
Joined: Mon Jun 27, 2016 3:06 am

Re: Prusa I3 X - Simplify3D Profile

Post by jeremy450 » Wed Jun 29, 2016 7:28 am

Hi William

I'm using Repetier-Host? But I am having major issues with supports with slicer3d. Problems to the point where by the time you get the supports off you've destroyed print. All my research has found that there's major issues with supports with slicer3d and Repetier. So want to use simplify3d.

Regards
Jeremy

User avatar
William
Site Admin
Posts: 6331
Joined: Tue Jun 07, 2016 9:38 am

Re: Prusa I3 X - Simplify3D Profile

Post by William » Wed Jun 29, 2016 9:10 am

jeremy450 wrote:Hi William

I'm using Repetier-Host? But I am having major issues with supports with slicer3d. Problems to the point where by the time you get the supports off you've destroyed print. All my research has found that there's major issues with supports with slicer3d and Repetier. So want to use simplify3d.

Regards
Jeremy
Hi,Jeremy
I guess you mean the support material problem?Could you plz give me more details about it?
Best Regards
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

jeremy450
Posts: 8
Joined: Mon Jun 27, 2016 3:06 am

Re: Prusa I3 X - Simplify3D Profile

Post by jeremy450 » Thu Jun 30, 2016 6:59 pm

Hi William

Sorry for the late reply didnt get the email that you replied to me. The problem i am having is when i use Repetier-Host the support material is extremely hard to remove to the point where you almost or in one case i had broken the print. Currently i am using Craftware's software and i dont have any major issues with the supports and find them very ease to remove the support material. But i would like to try and use Simplify 3D but i want to get all the correct settings, etc before i attempt to buy and install the software. As from everything i have seen Simplify 3D has the best slicer, etc out there.

regards
Jeremy

User avatar
William
Site Admin
Posts: 6331
Joined: Tue Jun 07, 2016 9:38 am

Re: Prusa I3 X - Simplify3D Profile

Post by William » Fri Jul 01, 2016 2:38 pm

jeremy450 wrote:Hi William

Sorry for the late reply didnt get the email that you replied to me. The problem i am having is when i use Repetier-Host the support material is extremely hard to remove to the point where you almost or in one case i had broken the print. Currently i am using Craftware's software and i dont have any major issues with the supports and find them very ease to remove the support material. But i would like to try and use Simplify 3D but i want to get all the correct settings, etc before i attempt to buy and install the software. As from everything i have seen Simplify 3D has the best slicer, etc out there.

regards
Jeremy
Hi,Jeremy
Have you alrady seen this before?https://www.simplify3d.com/support/tuto ... tructures/
I should say,you only can get some reference from the user manual and learn what each setting means,cuz it doesn't fit every object you print if i give you a default config.How do you think ?
Regards
William
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

jeremy450
Posts: 8
Joined: Mon Jun 27, 2016 3:06 am

Re: Prusa I3 X - Simplify3D Profile

Post by jeremy450 » Sat Jul 02, 2016 11:54 pm

Hey William

i already deal with Support modification with Craftware. They give you the ability to remove/add supports all you want. so far its been going well. Had a few issues but i am still changing it and supports a almost as good as simplify 3D.

it would help alot as reading manuals and see the actual settings are alot different and easier to see and understand.

Thanks
regards
Jeremy

merlinorn
Posts: 1
Joined: Thu Nov 16, 2017 6:29 am

Re: Prusa I3 X - Simplify3D Profile

Post by merlinorn » Wed Jan 24, 2018 4:58 am

i'm looking for simpify 3d profile... my printer is geeetech aluminium prusa i3

Post Reply