Page 1 of 1

How to install the driver

Posted: Wed Apr 15, 2015 1:53 pm
by zhangxueyou
Generally, you don't have to manually install the driver if your board type is Sanguinololu or GT2560, because your computer will automatically install it when it is your first time to connect it to your computer.
As for people whose mainboard type is Ramps1.4+Mega2560 (or R3), you have to Download "Arduino" first.
Download link:
http://arduino.googlecode.com/files/ard ... indows.zip
After downloading, unzip the file.
Then you can intall the driver for Arduino Mega 2560(R3). The driver is at: arduino-1.0.1-windows\arduino-1.0.1\drivers
you can refer to this page to install the driver:
http://www.geeetech.com/wiki/index.php/ ... he_drivers

Re: How to install the driver

Posted: Mon Apr 29, 2019 11:39 pm
by alaha1125
An error link. Can you update it? Thanks in advance!

Re: How to install the driver

Posted: Mon May 25, 2020 7:11 pm
by ivaanadam
It is really an informative post and it helped me very much in my driver installation. advantages and disadvantages of medical technology You gave detailed step by step instructions about this installation and the link you have shared also good. It is a very useful post too.

Re: How to install the driver

Posted: Fri Jul 03, 2020 8:58 am
by patsm00re18
If we are wanted to know about the installation of this drive then we came to the right place for it. https://sites.google.com/view/subwaysurfers-pc/