How to connect your printer to Repetier Host

IjyaPandey
Posts: 1
Joined: Wed Aug 07, 2019 6:30 pm

Re: How to connect your printer to Repetier Host

Post by IjyaPandey » Sat Aug 10, 2019 5:04 pm

https://docsbay.net/how-to-use-repetier-host Open Repetier-Hostand click Printer Settings, located in the top right region of Repetier. Remember these settings because you'll need to enter them again later in the slicer settings. Once you're in Printer Settings, click Add at the top (next to Configuration) to add a new printer.

Girdan
Posts: 1
Joined: Tue Oct 01, 2019 6:28 pm

Re: How to connect your printer to Repetier Host

Post by Girdan » Tue Oct 01, 2019 6:31 pm

IjyaPandey wrote:
Sat Aug 10, 2019 5:04 pm
https://docsbay.net/how-to-use-repetier-host Open Repetier-Hostand click Printer Settings, located in the top right region of Repetier. Remember these settings because you'll need to enter them again later in the slicer settings. Once you're in Printer Settings, click Add at the top (next to Configuration) to add a new printer.
Thanks, you helped me a lot. I have been looking for a solution for a long time. Best regards :)

kawee
Posts: 2
Joined: Sat Oct 05, 2019 6:41 pm

can't connect your printer to Repetier Host

Post by kawee » Mon Oct 07, 2019 1:05 pm

Before plugging in the USB cable, the LCD shows that the c is ready.
But when plugging in the USB cable into LCD shows 192.168.1.107 3344
And unable to connect.

Please help me.

Post Reply

Who is online

Users browsing this forum: No registered users and 45 guests