how to connect USBtinyISP Programmer to GT2560 V4 board

Post Reply
jrrrst
Posts: 6
Joined: Sun Nov 24, 2019 5:46 pm

how to connect USBtinyISP Programmer to GT2560 V4 board

Post by jrrrst » Sun Jan 12, 2020 6:00 pm

I have to flash my board with a new bootloader. The new borad GT2560 V4 doesnt have the 6 pin connector anymore.
I can not find anywhere information how to connect the programmer with the board.
Who can help? best with picture

jrrrst
Posts: 6
Joined: Sun Nov 24, 2019 5:46 pm

Re: how to connect USBtinyISP Programmer to GT2560 V4 board

Post by jrrrst » Tue Jan 14, 2020 9:40 pm

Thank you very much. Hope this also can help others

FranatiX
Posts: 3
Joined: Sat Jan 04, 2020 6:01 am

Re: how to connect USBtinyISP Programmer to GT2560 V4 board

Post by FranatiX » Sat Mar 14, 2020 3:57 am

Take a look at the backside of the mainboard. I can't believe that it's possible to flash a bootloader using the 9pin header. To me it looks like it is to connect x,y,z max endstops.
Attachments
Gt2560_v4.0 backside.jpg
Gt2560_v4.0 backside.jpg (338.19 KiB) Viewed 14900 times

Paul Matthews
Posts: 2
Joined: Thu Jan 16, 2020 9:21 am

Re: how to connect USBtinyISP Programmer to GT2560 V4 board

Post by Paul Matthews » Sun Mar 15, 2020 12:59 pm

Hi so witch 6 pins do we use to flash a bootloader in your photo please

jrrrst
Posts: 6
Joined: Sun Nov 24, 2019 5:46 pm

Re: how to connect USBtinyISP Programmer to GT2560 V4 board

Post by jrrrst » Sun Mar 15, 2020 6:50 pm

Anybody know where on the GT2560 V4 board to connect the USPTiny programer?

Lakyn
Posts: 7
Joined: Mon Feb 03, 2020 10:17 am

Re: how to connect USBtinyISP Programmer to GT2560 V4 board

Post by Lakyn » Thu Apr 16, 2020 2:37 pm

Anyone?

Lakyn
Posts: 7
Joined: Mon Feb 03, 2020 10:17 am

Re: how to connect USBtinyISP Programmer to GT2560 V4 board

Post by Lakyn » Sun Apr 26, 2020 7:34 am

Managed to trace it.
GT2560_V4_pins.jpg
GT2560_V4_pins.jpg (337.79 KiB) Viewed 12239 times

Post Reply