How to update the hex firmware via cura

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

How to update the hex firmware via cura

Post by William » Tue Dec 10, 2019 10:29 am

Hi,Guys

something about how to update the hex firmware via cura

:lol: 1.you need open cura

If your computer cannot automatically generate ports,
You need to install the driver manually.

you can refer to this: https://www.geeetech.com/forum/viewtopi ... RlcFtWdCG4

2.Download the hex firmware you need on the official website

PS:(I downloaded A20M)

you can download this link: https://www.geeetech.com/

80WVR5KAHVBB7C$F9$UT2$2.png
80WVR5KAHVBB7C$F9$UT2$2.png (91.3 KiB) Viewed 25847 times
3.choose the settings-printer-manage printer
01.png
01.png (132.72 KiB) Viewed 25847 times
4.choose printer-update firmware

choose you download the hex firmware
02.png
02.png (51.58 KiB) Viewed 25847 times
5.done
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Vene90
Posts: 1
Joined: Tue Dec 24, 2019 4:03 am

Re: How to update the hex firmware via cura

Post by Vene90 » Sat Jan 25, 2020 12:30 am

This is not working for me. I even try the method hold reset button and click update but after I put hex file in it just fail and than I can not even press to chose an file. Just like no printer connected.

Chub
Posts: 51
Joined: Sun Jan 13, 2019 2:35 am

Re: How to update the hex firmware via cura

Post by Chub » Mon Feb 17, 2020 8:12 am

Bernie to upgrading Marlin. So all I have to do is download configuration files and upgrade through Cura? No Arduino stuff? I am on Marlin 1.8. Can I load anyone's A10M config? Is the official Geeetech files 1.19 or 2.0?
Hopefully it is that easy. I have read that some people have issues after update. What can I expect?

Thanks in advance

Chub
Posts: 51
Joined: Sun Jan 13, 2019 2:35 am

Re: How to update the hex firmware via cura

Post by Chub » Mon Feb 17, 2020 8:13 am

So to upgrade to Marlin. So all I have to do is download configuration files and upgrade through Cura? No Arduino stuff? I am on Marlin 1.1.8. Can I load anyone's A10M config? Is the official Geeetech files 1.1.19 or 2.0?
Hopefully it is that easy. I have read that some people have issues after update. What can I expect?

Thanks in advance

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: How to update the hex firmware via cura

Post by William » Mon Feb 17, 2020 8:54 am

Hi,if your firmware is fine, it is not recommended to update.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Chub
Posts: 51
Joined: Sun Jan 13, 2019 2:35 am

Re: How to update the hex firmware via cura

Post by Chub » Mon Feb 17, 2020 9:31 am

Thank you for the advice. That's why I have dragged my feet on upgrading.
I suddenly am getting huge layer shift after like 5 layers. I have checked belts, bolts for tightness. All seems good. I figured if I had to adjust stuff, I might as well upgrade. I will keep 1.1.8 for now.
Thoughts on layer shift after multiple layers are successful? All was good, them BAM.

pycosopa
Posts: 1
Joined: Sat Jun 19, 2021 6:11 pm

Re: How to update the hex firmware via cura

Post by pycosopa » Sat Jun 19, 2021 6:12 pm

Arch society is a society made for interactions between the people and enhances the communication skills of people. On this page, some rules of the society are written like no use of the offensive word in the post, etc. sportswear for women to get more information.
Last edited by pycosopa on Tue Oct 12, 2021 4:38 pm, edited 1 time in total.

johnowen
Posts: 2
Joined: Thu Sep 09, 2021 12:25 pm

Re: How to update the hex firmware via cura

Post by johnowen » Thu Sep 09, 2021 12:39 pm

I am really frustrated with this. Every time I tried but was unable to download it via CURA. I have checked thoroughly https://www.exactlly.com/blog/index.php ... -benefits/ but was unable to download it. Can anyone from here please tell me where the issues are?

jonemartin
Posts: 8
Joined: Tue Sep 14, 2021 9:30 pm

Re: How to update the hex firmware via cura

Post by jonemartin » Tue Sep 14, 2021 11:40 pm

When you need to repair, replacement, a new system installation, or kept maintenance for your indoor and outdoor Door lock systems, you can rely on Furnace Repair and Replacement in Fort Worth TX expert team to get the job done quickly and efficiently. Malcolm’s heating and air provide you the best services to you. It’s our first priority to make customer satisfied and happy.

hehyqijip
Posts: 1
Joined: Fri Sep 17, 2021 2:30 pm

Re: How to update the hex firmware via cura

Post by hehyqijip » Fri Sep 17, 2021 2:31 pm

Question here is how to update the hex firmware via cura that is from the board index and other suitable sense. The methodology has been share that is completing the Cheap electronic cigarettes in UAE with the proper steps and the dimensions of all kinds.

Post Reply