firmware for Sangoinololu 1.3a

Post Reply
BQSOLDest
Posts: 3
Joined: Mon Jul 20, 2015 6:00 pm

firmware for Sangoinololu 1.3a

Post by BQSOLDest » Mon Jul 20, 2015 6:03 pm

Good afternoon!
Tell me where you can download the firmware for Sangoinololu 1.3a?
Top
Sherry
Posts: 362
Joined: Wed Jul 01, 2015 12:52 pm

Re: firmware for Sangoinololu 1.3a

Post by Sherry » Tue Jul 21, 2015 3:21 pm

BQSOLDest wrote:Good afternoon!
Tell me where you can download the firmware for Sangoinololu 1.3a?
could you tell me your printer type?
Top
BQSOLDest
Posts: 3
Joined: Mon Jul 20, 2015 6:00 pm

Re: firmware for Sangoinololu 1.3a

Post by BQSOLDest » Tue Jul 21, 2015 3:38 pm

geeetech I3B acrilic
Top
amigone
Posts: 7
Joined: Wed Aug 12, 2015 9:05 pm

Re: firmware for Sangoinololu 1.3a

Post by amigone » Thu Aug 13, 2015 8:04 am

I all so need the firmware for sangoinololu 1.3a prusa i3b
Top
Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: firmware for Sangoinololu 1.3a

Post by Mark » Thu Aug 13, 2015 9:14 am

Download it here .
Attachments
PI3B-Sanguino.rar
(229.88 KiB) Downloaded 439 times
Top
MannyJayBustos
Posts: 7
Joined: Sun Apr 26, 2015 10:58 am

Re: firmware for Sangoinololu 1.3a

Post by MannyJayBustos » Fri Aug 14, 2015 1:07 pm

I would like to use grid mode in marlin but the firmware for my printer is old . Could you send me over the latest marlin firmware for my printer?

Geeetech I3b clear with Sangoinololu .

mannyjaybustos@gmail.com

Thanks
Manny
Top
MannyJayBustos
Posts: 7
Joined: Sun Apr 26, 2015 10:58 am

Re: firmware for Sangoinololu 1.3a

Post by MannyJayBustos » Sun Aug 16, 2015 4:46 am

Thanks for the files. However the Marlin firmware is 1.0.0. Is there a way to get me firmware with Marlin 1.0.2 ? Of not ,can you show how to install a Marlin update ? I am not sure how to do it.


Geeetech /I3b /clear / Sangoinolou

Thanks
Manny
Top
MannyJayBustos
Posts: 7
Joined: Sun Apr 26, 2015 10:58 am

Re: firmware for Sangoinololu 1.3a

Post by MannyJayBustos » Sun Aug 16, 2015 5:07 am

Sorry I did not put my e mail in my last post mannyjaybustos@gmail.com

Thanks Manny
Top
Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: firmware for Sangoinololu 1.3a

Post by Mark » Mon Aug 17, 2015 3:27 pm

Reburn your firmware as the pic shows.
Attachments
compile.jpg
compile.jpg (193.89 KiB) Viewed 12356 times
Top
MannyJayBustos
Posts: 7
Joined: Sun Apr 26, 2015 10:58 am

Re: firmware for Sangoinololu 1.3a

Post by MannyJayBustos » Tue Aug 18, 2015 8:11 am

You are not answering my question.. Do you have Firmware that has Marlin 1.0.2. ? The firmware you sent me is Marlin 1.0.0. My printer was to have the latest firmware when I purchased it in April of 2015 . Marlin 1.0.2 Is the current firmware with a release of January 2015.


Manny
Top
Post Reply

Return to “Firmware”