Page 5 of 5
Re: How to upload the firmware to Sanguinololu
Posted: Thu Nov 02, 2017 2:41 pm
by William
Maybe you need to replace a new motherboard.
Re: How to upload the firmware to Sanguinololu
Posted: Sun Sep 30, 2018 2:34 pm
by Matrixer
Hello!
I tried to install the firmware for my new I3 Aluminium but in the folder "sanguino" is no *.ino file like in the description
viewtopic.php?f=13&t=17181
Can u help me?
thx
Re: How to upload the firmware to Sanguinololu
Posted: Fri Mar 15, 2019 6:46 pm
by capnjack
is it possible for someone to do this same process for this machine with a rumba+ board ..i would be eternally grateful .thanks in advance i am a dodering old 60+ with some issues with software
Re: How to upload the firmware to Sanguinololu
Posted: Sat Mar 16, 2019 11:43 am
by William
capnjack wrote: ↑Fri Mar 15, 2019 6:46 pm
is it possible for someone to do this same process for this machine with a rumba+ board ..i would be eternally grateful .thanks in advance i am a dodering old 60+ with some issues with software
The steps of uploading fw to your printer:
- Install the drivers for it(Check your usb chip at first.If you are using the WIN10 then you can install the drivers on device manager)
- Then download the fw for your printer and extract it
Download the "U8glib.zip" files from :arduino.cc
- Open the"configuration.h" file and check the fw version
(For the version 1.02~1.04,you can upload it via Arduino 1.0.1)
(For the version 1.1.4~1.1.9,you can upload it via Arduino 1.8.5)
- Install the correct version arduino IDE in your printer
- Open the arduino ide and import the "U8glib.zip"to library
- File>open>click"Marlin.ino"
- Choose the board type then correct "COM"port
- Clcick upload
- Wating it finished and enjoy it.