I3 pro B firmware

Post Reply
Zolric
Posts: 8
Joined: Tue Jan 07, 2020 6:13 am

I3 pro B firmware

Post by Zolric » Sat Jan 18, 2020 10:16 am

Hi,
I'm a little afraid, I probably should to calibrate my printer I3 pro B. But in the firmware topic there is to much or not enough informations...
Which firmware should I use :
Marlin? Ramps? Sanguin ? 3d touch...?

Should I check my threaded rod and modify the source code? How to know my rod...

Should I send a gcode to the printer at the end? And how?

Should I use Marlin 2.0???

There is to many questions to be confident...

User avatar
William
Site Admin
Posts: 5121
Joined: Tue Jun 07, 2016 9:38 am

Re: I3 pro B firmware

Post by William » Sat Jan 18, 2020 10:37 am

:D Hi, Is there something wrong with your firmware?

If you upload the firmware,
You can download it on the official website: https://www.geeetech.com/download.html?download_id=34

Then you can refer to this for uploading: viewtopic.php?f=20&t=69684
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Zolric
Posts: 8
Joined: Tue Jan 07, 2020 6:13 am

Re: I3 pro B firmware

Post by Zolric » Sat Jan 18, 2020 3:22 pm

Thank you.

I had to change the power of the motor specially for z axis...
So I am trying my first printing with the calibration cube and I find some adjustments to do...
And also I have to understand why the printer has some difficulty to finish like the extruder don't have the strength to pull the plastic...

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest