A20T 3 in 1 Hotend

Post Reply
BreeOge
Posts: 22
Joined: Mon Jul 12, 2021 3:41 am

A20T 3 in 1 Hotend

Post by BreeOge » Tue Jul 27, 2021 3:03 am

Does the 3 in 1 hotend have Teflon tubes inside separate from the tubes attaching to the hotend. I noticed on some blending hotends they recommend replacing the internal tubes due to they melt and will cause blockage, or change them out with Capricorn tubing that can handle higher heat. I was wondering if the 3 in 1, has such tubes?

Thank you

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: A20T 3 in 1 Hotend

Post by Admin » Tue Jul 27, 2021 2:57 pm

Hello, the hotend structure of A20T is the Teflon tube directly into the hotend, not separate.

Post Reply