Hot End Upgrade or Ideas

Post Reply
Sallybui123
Posts: 1
Joined: Wed Sep 25, 2019 12:20 am

Hot End Upgrade or Ideas

Post by Sallybui123 » Wed Sep 25, 2019 12:23 am

Hi Guys,

I got this Hotend http://www.geeetech.com/reprap-hot-end- ... p-685.html
With my Aluminimum Reprap Prusa i3 Kitset.
But it really does not extrude well.

Is the kitest supposed to have a Fan?
Nothing is in the kitset.

Or should it work better with this one? http://www.geeetech.com/wiki/index.php/ ... t-distance

Thanks.

Sally

User avatar
William
Site Admin
Posts: 5111
Joined: Tue Jun 07, 2016 9:38 am

Re: Hot End Upgrade or Ideas

Post by William » Wed Sep 25, 2019 9:09 am

:D Hi, Can you provide specific pictures and models?
Different models correspond to different extruders.
Regarding the situation where it is not very good, you can see if your extruder nozzle is blocked.
Whether the Teflon tube is fully connected and the extruder motor is operating normally.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest