The Program Repetier Host

Post Reply
nobita123
Posts: 1
Joined: Mon Sep 16, 2019 2:51 pm

The Program Repetier Host

Post by nobita123 » Mon Sep 16, 2019 2:59 pm

Hi all,

I have some problems with my Prusa i3
I picked the 1.75mm ABS Filament in the Program Repetier Host as well as a 0.4mm nozzle. When using the program, I made a unnamed setting with all the tips from the Geeetech website (e.g. setting the printing speed etc.). I used ABS at 240°C Extruder Temp and 80°C Bed Temp. Still, all I get is a thin, almost invisible layer for the base layer and many “worms” and “blobs” around the nozzle, but no material, or, if I’m VERY lucky, some thin, irregular wormlike structures (as you can see in the picture). The nozzle is set about 0.2mm from the bed(two times DIN A4 paper thickness).
I hope there is something you can tell me to help me (e.g. use another program or something like this) as I’m quite frustrated and close to giving up on 3D-printing.
Thanks

User avatar
William
Site Admin
Posts: 5130
Joined: Tue Jun 07, 2016 9:38 am

Re: The Program Repetier Host

Post by William » Mon Sep 16, 2019 3:14 pm

Hi, You can try to heat the nozzle to the temperature of the heating consumable
and then manually push the consumables
to see if it can be discharged normally, to see if the nozzle is clogged.

If you can, please provide a specific print image or video.
So that we can solve the problem better. :D
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
_kaktus_
Site Admin
Posts: 1255
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: The Program Repetier Host

Post by _kaktus_ » Mon Sep 16, 2019 9:38 pm

Hello.
:mrgreen:

Tell me if you've calibrated the extruder.
When you lift the printhead, is the extrusion of the filament correct :?:

Sometimes it is worth to use a different filament to compare.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests