hotbed/extruder is not heated up(GT2560/GTM32/sanguinololu)

Prism blue
Posts: 3
Joined: Sun Feb 17, 2019 12:42 am

Re: hotbed/extruder is not heated up(GT2560/GTM32/sanguinololu)

Post by Prism blue » Tue Feb 19, 2019 2:39 am

If u could give a little more info about this thermistor is located I would appreciate it thank u for your help

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: hotbed/extruder is not heated up(GT2560/GTM32/sanguinololu)

Post by William » Tue Feb 19, 2019 9:13 am

You can check the info on firmware.
100K,NTC thermistor.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

ChrisH90
Posts: 32
Joined: Fri Apr 05, 2019 1:18 am

Re: hotbed/extruder is not heated up(GT2560/GTM32/sanguinololu)

Post by ChrisH90 » Wed Apr 10, 2019 12:06 pm

Hi, I have a A30 and I think I have problems with the heating element in the nozzle. Can anybody please tell me:
1) Restistance of the heating element
or/and
2) Power of heating element
In the Internet I found heating elements with 24V/40W and I don`t know if they are right.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: hotbed/extruder is not heated up(GT2560/GTM32/sanguinololu)

Post by William » Thu Apr 11, 2019 10:11 am

Hi,ChrisH90
1.The resistance of the heatbar is 12~16Ω
2.The power of the heatbar is 35~45W
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

ChrisH90
Posts: 32
Joined: Fri Apr 05, 2019 1:18 am

Re: hotbed/extruder is not heated up(GT2560/GTM32/sanguinololu)

Post by ChrisH90 » Sat Apr 13, 2019 3:38 pm

Hi, William,
yeah, that`s it. Okay, I founded broken heating element and changed it. Perfect, thank you so much!!! :) :)

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: hotbed/extruder is not heated up(GT2560/GTM32/sanguinololu)

Post by William » Sat Apr 13, 2019 10:50 pm

That's a good news that your printer works ;) again.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

martin92
Posts: 1
Joined: Sun Sep 27, 2020 5:46 pm

Re: hotbed/extruder is not heated up(GT2560/GTM32/sanguinololu)

Post by martin92 » Sun Sep 27, 2020 6:24 pm

Hey printer-folks,

I've got a similar problem that the heater was not heating up despite the fact that MOSFET, fuse, LEDs etc. all were OK. There were no 12V on the pins of the hot-end heater while the bed was working fine.

When unmounting the board (GT2560) I discovered this:
heater-pin.jpg
heater-pin.jpg (117.52 KiB) Viewed 18662 times
Re-soldered the PIN and got 12V again. First test-print prints since 5min. without problems.

Now, my question is wheter this was just due to bad soldering or is it maybe a symptom of a bigger problem in the setup? Maybe a short-circuit in the heating-element (actually I have changed it some 20 printing hours back)?

Cheers,
Martin

renzy945
Posts: 5
Joined: Wed Jan 19, 2022 11:56 pm

Re: hotbed/extruder is not heated up(GT2560/GTM32/sanguinololu)

Post by renzy945 » Thu Jan 20, 2022 12:00 am

Are you living in Dehradun and searching for a call girl to call girl you? If you're located in Dehradun or close to the city and are eager to enjoy a sexually opulent moment with a sexy call girl I am here to fulfill all your fantasies in secret. Many people simply enjoy an evening with their ideal female companion. I can provide you with the private and luxurious call girl services which you won't find from a call girl in Dehradun.
Dehradun call girls
Nainital call girls
Haldwani call girls
Rudrapur call girls
Ramnagar call girls
https://renzymehtha.blogspot.com/
https://sites.google.com/view/renzy-deh ... rt-service
https://renzymehtha.mystrikingly.com/
https://dehradunescortgirlservice.mystrikingly.com/
https://mussoorieescortgirlsservice.mystrikingly.com/
https://haridwarescortservicegirls.mystrikingly.com/
https://rishikeshescortgirlservice.mystrikingly.com/
https://dehradunescortservicegirls.splashthat.com/
http://rishikeshescortservice.splashthat.com
https://mussoorieescortservice.splashthat.com/
https://haridwarescortservice.splashthat.com/
https://renzy.escortbook.com/
https://603f9d9b2c2e3.site123.me/
https://renzy989.neocities.org/
http://www.geocities.ws/dehraduncallgirls/
https://renzys-initial-project.webflow.io/
http://renzy-mehtha.launchrock.com/
https://dehradunesservice.wixsite.com/my-site
https://dehradunescortservice1.bookmark.com/
https://topsitenet.com/profile/renzy945/720275/
https://www.jetphotos.com/photographer/289011
https://telegra.ph/Dehradun-Call-Girls- ... adun-01-11
https://ello.co/renzy945
https://nanohub.org/members/352528/profile
https://gab.com/renzy945
https://artistecard.com/renzy945#!/shows/2022/276057
https://www.longisland.com/profile/renzy945
https://veer.tv/vr/renzy945/collection
http://ttlink.com/renzy945
https://subrion.org/members/info/renzy945.html
https://ignitiondeck.com/id/forums/users/143313
https://bandzone.cz/fan/jiatomarnainita ... =info&cd=1
https://waffle360.tribe.so/user/renzy_malik
https://www.credly.com/users/renzy-mali ... 8b6/badges
https://pantip.com/profile/6824642#topics
http://greecefriends.de/messagebook/renzy945.html

Post Reply