FAQ

fotomickey
Posts: 24
Joined: Wed Jul 08, 2015 2:24 am
Location: Canada

Re: FAQ

Post by fotomickey » Sun Aug 30, 2015 7:22 am

I'll be interest to see a post video show how to disassemble Hot-head after usage too. My experience its impossible to dissemble after used (glued in). It is very frustrated process for me Thanks

Sandcrab3
Posts: 3
Joined: Sat Aug 22, 2015 6:17 am

Re: FAQ

Post by Sandcrab3 » Tue Sep 15, 2015 11:07 pm

No one has an answer for this. If not a video, a step by step procedure. I know that Geetech must know how this is done, even if the farm out the process for their assembled parts.

Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: FAQ

Post by Mark » Thu Sep 17, 2015 6:08 pm

Hi, guys , maybe you can find it here:
https://www.youtube.com/results?search_ ... 8%E7%A5%A5

fotomickey
Posts: 24
Joined: Wed Jul 08, 2015 2:24 am
Location: Canada

Re: FAQ

Post by fotomickey » Thu Sep 17, 2015 11:38 pm

As mentioned on the post, I want to see how the hotends disassemble after being used, it seem there are design faluse the hotends cannot deassemble after used. is It became 1 time use hotend. Please show a new video on use hotends to enlighten me if assumed wrong

Thanks

Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: FAQ

Post by Mark » Sat Sep 19, 2015 4:09 pm

you can refer to the picture bellow:
Attachments
QQ截图20150919160715.jpg
QQ截图20150919160715.jpg (224.06 KiB) Viewed 24965 times
QQ截图20150919160436.jpg
QQ截图20150919160436.jpg (212.13 KiB) Viewed 24965 times

fotomickey
Posts: 24
Joined: Wed Jul 08, 2015 2:24 am
Location: Canada

Re: FAQ

Post by fotomickey » Sat Sep 19, 2015 11:33 pm

Hi Mark, what about Delta Hotends, please show new video

Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: FAQ

Post by Mark » Mon Sep 21, 2015 5:45 pm

They are the same ones.

fotomickey
Posts: 24
Joined: Wed Jul 08, 2015 2:24 am
Location: Canada

Re: FAQ

Post by fotomickey » Tue Sep 22, 2015 1:45 am

Hi Mark

Please verify the design , Delta used J head which has heat resistance barrel, that is nothing in common with above picture.

Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: FAQ

Post by Mark » Tue Sep 22, 2015 4:36 pm

You mean the PEEK one, right? I suggest do not disassemble the PEEK Jhead, it's hard to make it work agian..

fotomickey
Posts: 24
Joined: Wed Jul 08, 2015 2:24 am
Location: Canada

Re: FAQ

Post by fotomickey » Wed Sep 23, 2015 12:06 am

Hi Mark

Then you confirm J head is dead once clogged. What sort of solutions/ options left for G2 delta. ? Please advise

Post Reply