FAQ

Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: FAQ

Post by Mark » Wed Sep 23, 2015 11:23 pm

No, it will still work unless it's melted. If just jammed, you can heat it up to about 210 for PLA and 230 for ABS, pull out the filament and use a drill to push the rest filament out form the nozzle.

fotomickey
Posts: 24
Joined: Wed Jul 08, 2015 2:24 am
Location: Canada

Re: FAQ

Post by fotomickey » Thu Sep 24, 2015 12:01 am

Hi Mark

Please refer to my original post, The J head did melt at 210 start bubbling leak out from the joint between head and plastic bellow. It become impossible to unclogged. The manufacture J head dissamble video don't really help or mus guide in the cleaning purpose https://youtu.be/OQG97plWXl0

Post Reply