I can't to load the filament

Post Reply
Quinche
Posts: 1
Joined: Tue May 05, 2015 1:32 pm

I can't to load the filament

Post by Quinche » Sun May 10, 2015 12:32 pm

Hello, I can not load my printer filament, they know what is the procedure for loading the filament in the extruder? 1.75mm

zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: I can't to load the filament

Post by zhangxueyou » Mon May 11, 2015 9:03 am

Press the spring and plug the filament into the nozzle. If you find it's stuck in the middle, use your eyes to observe how far the filament deviate from the hole, then unplug the filament and bend it slightly and plug it again.
If you really can not plug the into the nozzle, trying with the method above. You can unload the fan and heat sink first, then you can see where the hole is clearly.

AaronClay
Posts: 1
Joined: Mon Dec 06, 2021 2:57 pm

Re: I can't to load the filament

Post by AaronClay » Mon Dec 06, 2021 3:02 pm

This is a fantastic resource with a wealth of information. Friday Night Funkin' is the game that will help you recoup lost energy after a long day at work if you enjoy playing games to remain awake.

Post Reply