Extruder problem on Mecreator

Post Reply
digitmakers
Posts: 14
Joined: Wed Feb 11, 2015 12:29 pm

Extruder problem on Mecreator

Post by digitmakers » Thu Feb 12, 2015 11:18 am

Hi please find below video describe the problem with the Geeetech Mecreator

https://docs.google.com/file/d/0B5w3QL5 ... cslist_api
Top
ooi888
Posts: 23
Joined: Sat Jan 03, 2015 12:25 am

Re: Extruder problem on Mecreator

Post by ooi888 » Fri Feb 13, 2015 1:02 pm

I have same problem. The filament will melt and clog the barrel of the extruder. I received 2 units of MeCreator last October, but until now not able to do any print. The advice you get from Ge Tech will be to test this and that but will never admit it's their product design weakness.
Attachments
jam filament_2.jpg
jam filament_2.jpg (160.26 KiB) Viewed 5633 times
Top
zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Extruder problem on Mecreator

Post by zhangxueyou » Thu Mar 12, 2015 4:20 pm

Maybe it is because of the wiring issue.
http://www.geeetech.com/forum/viewtopic ... 215#p21215
Top
Post Reply

Return to “Extruder”