extruder motor

Post Reply
chenshaw
Posts: 1
Joined: Thu Jan 15, 2015 10:22 am

extruder motor

Post by chenshaw » Thu Jan 15, 2015 10:24 am

extruder motor stopped working. motor is good but not output when commanded by software, stall all fuctions till later then other motor and any other command works fine.

Cal
Top
john
Posts: 104
Joined: Fri Nov 14, 2014 1:45 pm

Re: extruder motor

Post by john » Fri Jan 16, 2015 11:41 am

The temperature must increase to 180 degree if you want to step the Extruder motor manually.
Top
Post Reply

Return to “Extruder”