I burned something down while connecting fans

Post Reply
ari93
Posts: 0
Joined: Sat Feb 10, 2018 2:04 pm

I burned something down while connecting fans

Post by ari93 » Sat Feb 10, 2018 2:08 pm

Hello Guys,

Today i tryed to install 3 fans (1x for Board / 1x PSU / 1x for extra cooling of extruder).

While i plugged them in nothign strange happend.

As soon i turned on the power i could smell a bit of burnt plastic.
As you can see on the pictures something burnt down.

Printer is still working fine so i am just wondering what just happend there ?

I posted a picture here :
https://imgur.com/a/8vPLG

Would be nice if something can help me out there

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: I burned something down while connecting fans

Post by William » Mon Feb 12, 2018 11:29 am

I think you should replace it with a new mainboard
It seems not safe at now.
I think the issue lead by the wirings of fans Short-circuit.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply