Geeetech

Open Repetier-Host (Download link: http://www.repetier.com/download-now/), Access "Printer settings": Set correct baud rate and serial port: Set amount of extruder as 2, and set correct nozzle diameter: Then you can control both extruders on Repetier-Host (Note:The extruder can not move unless the temperature is more than 180 degrees): Slicer setting:
To have a good 3D item,you need to have a good slicer setting, and distribute jobs for 2 extruders:
Click "configuration" to access slicer setting: For more details of sclicer setting, you can download the attachment to refer:

Thanks for sharing.

https://3dprinterchat.com

Could you save the slicer settings as a file that can be loaded instead of as a series of photos?

Did you notice this?
\\
slicer settings for I3C.zip
(740.38 KiB) Downloaded 169 times
\\

AbeFM wrote:Could you save the slicer settings as a file that can be loaded instead of as a series of photos?

Did you notice this part?

I mean a file with the settings which we can load directly.

Thanks for the information. And can I combine several printers in one program. For example, I will have one template and the same settings but two printers. Is it possible?

How to Activate Showtime Anytime? Install Showtime Anytime, the Showtime Everytime App to the Android Smart TV. * The app can be downloaded on the official website
Showtimeanytime/activate
play.google.com/redeem
lowe's gift card balance
primevideo/mytv
amazon.com/mytv
amazon.com/redeem
amazon.com/code
amazon.com/mytv
primevideo/mytv
amazon.com/code
amazon.com/redeem check balance
amazon.com/redeem check balance
Appstore.com/redeem

Thank you for providing this information. Is it possible to combine multiple printers into a single program? I want to print out the images of the drift hunters game, a speed racing game. Is it possible?