How to start Geeetech I3 Pro C in Repetier-Host

Post Reply
zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

How to start Geeetech I3 Pro C in Repetier-Host

Post by zhangxueyou » Tue May 26, 2015 3:02 pm

Open Repetier-Host (Download link: http://www.repetier.com/download-now/), Access "Printer settings":
QQ截图20150526094205.png
QQ截图20150526094205.png (133.12 KiB) Viewed 34692 times
Set correct baud rate and serial port:
choose baud rate and serial port.png
choose baud rate and serial port.png (23.6 KiB) Viewed 34640 times
Set amount of extruder as 2, and set correct nozzle diameter:
QQ截图20150526094443.png
QQ截图20150526094443.png (29.43 KiB) Viewed 34692 times
Then you can control both extruders on Repetier-Host (Note:The extruder can not move unless the temperature is more than 180 degrees):
QQ截图20150526145044.png
QQ截图20150526145044.png (75.72 KiB) Viewed 34692 times
Slicer setting:
To have a good 3D item,you need to have a good slicer setting, and distribute jobs for 2 extruders:
Click "configuration" to access slicer setting:
QQ截图20150526094538.png
QQ截图20150526094538.png (86.4 KiB) Viewed 34692 times
For more details of sclicer setting, you can download the attachment to refer:
slicer settings for I3C.zip
(740.38 KiB) Downloaded 1265 times

lobbo1979
Posts: 1
Joined: Wed Mar 16, 2016 11:32 am

Re: How to start Geeetech I3 Pro C in Repetier-Host

Post by lobbo1979 » Wed Mar 16, 2016 11:37 am

Thanks for sharing.

https://3dprinterchat.com

AbeFM
Posts: 15
Joined: Thu Dec 22, 2016 1:51 pm

Re: How to start Geeetech I3 Pro C in Repetier-Host

Post by AbeFM » Wed Dec 28, 2016 10:29 am

Could you save the slicer settings as a file that can be loaded instead of as a series of photos?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: How to start Geeetech I3 Pro C in Repetier-Host

Post by William » Wed Dec 28, 2016 10:48 am

Did you notice this?
\\
slicer settings for I3C.zip
(740.38 KiB) Downloaded 169 times
\\
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

AbeFM
Posts: 15
Joined: Thu Dec 22, 2016 1:51 pm

Re: How to start Geeetech I3 Pro C in Repetier-Host

Post by AbeFM » Wed Dec 28, 2016 12:08 pm

AbeFM wrote:Could you save the slicer settings as a file that can be loaded instead of as a series of photos?
Did you notice this part? :-)

I mean a file with the settings which we can load directly.

Galas
Posts: 1
Joined: Mon Jan 11, 2021 11:53 pm
Location: Texas, US
Contact:

Re: How to start Geeetech I3 Pro C in Repetier-Host

Post by Galas » Tue Jan 12, 2021 1:32 am

Thanks for the information. And can I combine several printers in one program. For example, I will have one template and the same settings but two printers. Is it possible?

imrozahmad
Posts: 10
Joined: Thu Nov 25, 2021 3:30 pm

Re: How to start Geeetech I3 Pro C in Repetier-Host

Post by imrozahmad » Thu Nov 25, 2021 3:39 pm

How to Activate Showtime Anytime? Install Showtime Anytime, the Showtime Everytime App to the Android Smart TV. * The app can be downloaded on the official website
Showtimeanytime/activate
play.google.com/redeem
lowe's gift card balance
primevideo/mytv
amazon.com/mytv
amazon.com/redeem
amazon.com/code
amazon.com/mytv
primevideo/mytv
amazon.com/code
amazon.com/redeem check balance
amazon.com/redeem check balance
Appstore.com/redeem

LucyKelly
Posts: 1
Joined: Mon Dec 06, 2021 7:14 pm

Re: How to start Geeetech I3 Pro C in Repetier-Host

Post by LucyKelly » Mon Dec 06, 2021 7:18 pm

Thank you for providing this information. Is it possible to combine multiple printers into a single program? I want to print out the images of the drift hunters game, a speed racing game. Is it possible?

Post Reply