Z Axis moves

Post Reply
RafaelHollis
Posts: 1
Joined: Wed Dec 29, 2021 2:44 am

Z Axis moves

Post by RafaelHollis » Wed Dec 29, 2021 2:45 am

Hi All,

When tell the z to move up or down 100mm I get a little less then 25mm.

I checked the voltage of the motor driver and is at 1 volt ...

M8 Rod as supplied, and the z steps/mm is 2650

Movement is smooth and does not seems to have an issue, also the coupling is not slipping.

Post Reply