Iduino Yun Shield - Can Not Use The USB-Flash

Post Reply
leon2225
Posts: 2
Joined: Sat May 02, 2015 5:01 am

Iduino Yun Shield - Can Not Use The USB-Flash

Post by leon2225 » Sat May 02, 2015 5:08 am

Hello,
I'm trying to get the TemperatureWebPanel working for now about 2 days, but it simply wont work.
I've created the directory arduino/www/ on my USB-Flash, also the bridge is working, but if I want to open "http://YUN_IP/arduino/temperaturewebpanel/ the only thing I see is an empty page ...

I would be very happy, if you could help me! :)

Leon
Top
zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Iduino Yun Shield - Can Not Use The USB-Flash

Post by zhangxueyou » Mon May 04, 2015 11:33 am

You can refer to this page, hope it will help you:
http://www.geeetech.com/wiki/index.php/ ... nt.2Fsd.3F
Top
leon2225
Posts: 2
Joined: Sat May 02, 2015 5:01 am

Re: Iduino Yun Shield - Can Not Use The USB-Flash

Post by leon2225 » Tue May 05, 2015 12:20 am

Of course I've already read that one, but it doesn't help...
Top
zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: Iduino Yun Shield - Can Not Use The USB-Flash

Post by zhangxueyou » Tue May 05, 2015 3:04 pm

You must have something left out. The tutorial in wiki was tested before posted.
Top
Bournetoride
Posts: 2
Joined: Sun Feb 21, 2016 12:19 am

Re: Iduino Yun Shield - Can Not Use The USB-Flash

Post by Bournetoride » Sun Feb 21, 2016 12:24 am

I too cannot use USB stick.
I have enabled mount point and Iduino had recognised my stick as it was offered in a drop-down.
Mount point is not shown as connected
Stick is prepared with required directories but nothing is loaded when I upload TemperatureWebPanel

Your Wiki is very weak on this point, it suggests USB is mounted automatically without any setting, please improve this tutorial
Top
Post Reply

Return to “Open Hardware”