Hi,
I try to upload this brick, but unsuccessful..
I've connected RX and TX, Groun and 5V. The same cable is used to upload a Mini 168 successful.
What are you meaning ?
I use the latest version of Arduino (1.0), choice the mini board with 328.
upload Arduino Mini 328
- techsupport
- Site Admin
- Posts: 210
- Joined: Sat Mar 03, 2012 2:32 pm
Re: upload Arduino Mini 328
Hi friend;
Please press and hold the reset button on board,press upload in the IDE. As soon as the Led on the converter flicker, release the reset button.
Please press and hold the reset button on board,press upload in the IDE. As soon as the Led on the converter flicker, release the reset button.
Your real trustworthy partner in China!!
Email: forum@geeetech.com
Email: forum@geeetech.com
Re: upload Arduino Mini 328
Hi dear friend,
I've tried. I am not using an USB converter. I use the serial port with a MAX232 to convert rs232 to 5V.
I press the reset button and release when a message (in white) appear on the bottom screen.
But unsuccessful.
The same operation is fine with a 168.
Best regards.
I've tried. I am not using an USB converter. I use the serial port with a MAX232 to convert rs232 to 5V.
I press the reset button and release when a message (in white) appear on the bottom screen.
But unsuccessful.
The same operation is fine with a 168.
Best regards.
- techsupport
- Site Admin
- Posts: 210
- Joined: Sat Mar 03, 2012 2:32 pm
Re: upload Arduino Mini 328
Hi Schrist,
please use a USB converter to program it, and detect if it's your serial port problem or the mini328,
we test all the items before shipping,
Thanks,
please use a USB converter to program it, and detect if it's your serial port problem or the mini328,
we test all the items before shipping,
Thanks,
Your real trustworthy partner in China!!
Email: forum@geeetech.com
Email: forum@geeetech.com
Re: upload Arduino Mini 328
Hi,
Sorry, I did not have an USB converter....
Best regards
Sorry, I did not have an USB converter....
Best regards
Re: upload Arduino Mini 328
Hi,
My serial port run fine:
when I change the module328 with a 168 in the same soket, upload run fine...
best regards.
My serial port run fine:
when I change the module328 with a 168 in the same soket, upload run fine...
best regards.
Re: upload Arduino Mini 328
Hi,
No Answer ?
I've found the problem: just connect a Led on the 13 pin. The Led blink always at a frequency of 0.5Hz.....
Did you understand ?
I understand that there is no bootloader. It is right ?
If yes, how to burn bootloader ?
Regards
Sébastien
No Answer ?
I've found the problem: just connect a Led on the 13 pin. The Led blink always at a frequency of 0.5Hz.....
Did you understand ?
I understand that there is no bootloader. It is right ?
If yes, how to burn bootloader ?
Regards
Sébastien
Re: upload Arduino Mini 328
Hi, friend;
Sorry for late, the bootloader must be burned onto it in advance, we will offer you another one.
Regards;
Jack
Sorry for late, the bootloader must be burned onto it in advance, we will offer you another one.
Regards;
Jack
Re: upload Arduino Mini 328
Hello,
I just found an AVR device (ISP) and burn the bootloader.
I can load my sketch ! (on the two devices).
I've another problem: with the arduino 23 the loading process run fine.
But with the last arduino IDE 1.0, I become an error message that the sigature of device is bad (try -F to override). I did not understand. Have you an idea ?
Regards.
Sébastien
I just found an AVR device (ISP) and burn the bootloader.
I can load my sketch ! (on the two devices).
I've another problem: with the arduino 23 the loading process run fine.
But with the last arduino IDE 1.0, I become an error message that the sigature of device is bad (try -F to override). I did not understand. Have you an idea ?
Regards.
Sébastien
Re: upload Arduino Mini 328
Hi friend,
In some place, Arduino IDE 1.0 is not compatible with early version. Generally, we suggest our customer using IDE V22 for reliablity
regards,
Jack
In some place, Arduino IDE 1.0 is not compatible with early version. Generally, we suggest our customer using IDE V22 for reliablity
regards,
Jack