2nd extruder on GT2560 rev B?

Post Reply
povlhp
Posts: 8
Joined: Fri Mar 31, 2017 4:12 am

2nd extruder on GT2560 rev B?

Post by povlhp » Sun Feb 25, 2018 2:29 pm

Did anybody put a 2nd extruder on the GT2560 Rev B ?
There are sockets for 2 extra stepper drivers. And empty holes for an 8-pin header with each of them. So like a copy of the one for the existing.
But no pin out and we need HW pin mapping as well.

Now I have 2 dual hotend a I would like to try. And extra extruder.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: 2nd extruder on GT2560 rev B?

Post by William » Mon Feb 26, 2018 4:26 pm

You can refer to this pic
GT2560VB-HOTBED.jpg
GT2560VB-HOTBED.jpg (146.74 KiB) Viewed 13696 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

AlanB
Posts: 1
Joined: Fri Nov 06, 2020 6:57 am

Re: 2nd extruder on GT2560 rev B?

Post by AlanB » Fri Nov 06, 2020 7:14 am

Can I add another extruder to the gt2560 on my A20T using pins left out on the board?

Post Reply