cracks on the feeder

jjcchhrr
Posts: 21
Joined: Mon Dec 05, 2016 7:46 pm

Re: cracks on the feeder

Post by jjcchhrr » Tue Feb 21, 2017 2:42 am

hello thanks for the answer great support
i made the try and in effect it works i was wrong

hope not to deal with you again :D even if it s one of the best support i met
thanks

bang
Posts: 402
Joined: Wed Dec 28, 2016 2:12 pm

Re: cracks on the feeder

Post by bang » Tue Feb 21, 2017 2:30 pm

jjcchhrr wrote:hello thanks for the answer great support
i made the try and in effect it works i was wrong

hope not to deal with you again :D even if it s one of the best support i met
thanks
Hi,
So what did you do to solve it?

jjcchhrr
Posts: 21
Joined: Mon Dec 05, 2016 7:46 pm

Re: cracks on the feeder

Post by jjcchhrr » Tue Feb 21, 2017 2:50 pm

sorry i get the answer by e mail by some one of your technical support
in fact it s the normal way of working when i made the test the nozzle didn t start heating until the heat bed arrive at the temperature
i have had some mistake a few time but but not a regular trouble
it works deferently after a stop and start they both start heating together
but after 3 test it the nozzle start heating after the bed at the good temperature
so i did nothing else or may be what you ask to me works (reinstalling firmware and changing the sd card)
thanks for your help(

lonessam
Posts: 1
Joined: Fri Jun 17, 2022 11:49 am

Re: cracks on the feeder

Post by lonessam » Fri Jun 17, 2022 11:58 am

I have a video edited on the InShot APK. That video may help you to solve your problem. If you are still worried about it, please let me know. I will share the link.

Post Reply