Guide on proper filament replacement

Post Reply
eddyuk
Posts: 48
Joined: Sun Oct 30, 2016 2:05 am

Guide on proper filament replacement

Post by eddyuk » Wed Jun 10, 2020 6:34 pm

Hi,

Is there a guide on how to properly remove filament and insert filament on 3 nozziles? I always endup unclogging the hotend in the way I do it so wonder if I do it wrong.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Guide on proper filament replacement

Post by William » Thu Jun 11, 2020 9:16 am

-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

eddyuk
Posts: 48
Joined: Sun Oct 30, 2016 2:05 am

Re: Guide on proper filament replacement

Post by eddyuk » Thu Jun 11, 2020 3:22 pm

Thanks for answer, but it is cleaning procedure. I am actually referring to guide on loading and unloading filament.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Guide on proper filament replacement

Post by William » Fri Jun 12, 2020 10:41 am

Hi,it is recommended that you try to clean the hot end every time you run out
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Barmac
Posts: 10
Joined: Sun Feb 17, 2019 4:22 am

Re: Guide on proper filament replacement

Post by Barmac » Wed Jun 17, 2020 7:04 am

William
There has to be a better way.
You can't really expect people to do that every time they change filament.
How about switching to Teflon tubing?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Guide on proper filament replacement

Post by William » Wed Jun 17, 2020 9:39 am

You can let the three extruders discharge before printing, and then start printing.
Our white tubes are made of Teflon, make sure they are inserted at the bottom
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply