hotend

Post Reply
matera112
Posts: 2
Joined: Sat May 16, 2020 5:59 am

hotend

Post by matera112 » Sat May 16, 2020 6:21 am

Please someone can help me?
Im using a A10T and when i wanted to repleace the nozzle it screwd itself in a bad angle... it made a new bad tread and i dont know what should i do .Do i need to repleace the whole hotend???

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: hotend

Post by William » Mon May 18, 2020 10:02 am

Hello, can you provide pictures? You can try printing to see if it can print normally.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

matera112
Posts: 2
Joined: Sat May 16, 2020 5:59 am

Re: hotend

Post by matera112 » Tue May 19, 2020 8:55 pm

Yes i can i think i need to make a new thread for the nozzle.But i can t do it myself only a factory or a cnc workshop can.
Attachments
98605330_1595180120648128_6913414663719878656_n.jpg
98605330_1595180120648128_6913414663719878656_n.jpg (188.49 KiB) Viewed 12219 times
97993528_733820447361957_1537900498751848448_n.jpg
97993528_733820447361957_1537900498751848448_n.jpg (180.61 KiB) Viewed 12219 times
97992945_588066781834053_8832356071038255104_n.jpg
97992945_588066781834053_8832356071038255104_n.jpg (289.2 KiB) Viewed 12219 times
97995773_1151152051885940_5596357676771573760_n.jpg
97995773_1151152051885940_5596357676771573760_n.jpg (252.04 KiB) Viewed 12219 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: hotend

Post by William » Wed May 20, 2020 9:06 am

Hi,you can contact the salesperson on the purchase platform.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply