Page 3 of 3

Re: A10T profile

Posted: Mon Dec 16, 2019 2:29 am
by Sardauker
Wipe and prime volume.

Try increasing that, you'll See the tower Will grow in area.
(If I Remember my math, doubling the volume wil increase the side of the tower of *1.41)

Now, if i Just could understand how to pur that tower outside the plate...

Re: A10T profile

Posted: Mon Dec 16, 2019 3:20 pm
by ThomasGee
Nope,
no change of size

Re: A10T profile

Posted: Mon Dec 16, 2019 3:38 pm
by ThomasGee
at least, if there is change, it is not big enough.
The nozzle hits the tower and moves the bed in the wrong direction.
The more colorchanges in the print, the more the nozzles moves the bed. There aer then 3 colors on one layer in the tower.

Re: A10T profile

Posted: Mon Dec 16, 2019 6:38 pm
by Sardauker
Same here, no matter the side of the tower.

This Is why I am looking for the purge bucket option.

Re: A10T profile

Posted: Sat Jan 04, 2020 7:22 pm
by Sardauker
is there AT LEAST a way to put the purge tower outside the bed?

Re: A10T profile

Posted: Sat Jan 04, 2020 10:20 pm
by Jarda3d